Milan Technology EFLHB0X00, E-FL-HB-0400 Technical Specifications, Declaration of Conformity

E-FL-HB-0x00 IN THE NETWORK

TECHNICAL SPECIFICATIONS

Install one E-FL-HB-0x00 hub and use fiber cable to set up a workgroup by connecting the hub to terminal devices.

10BASE-FL

1 2 3 4 5 6 7 8

Standards	IEEE 802.3
Dimensions	17.25" x 8.5" x 1.7"	(437 mm x 216 mm x 43 mm)
Power
Input Range:	100 to 240 VAC at 50 or 60 Hz, 3.0 A maximum.
	Rated at 40 watts maximum.
Environment	Operating Temperature:	0° to 50°C (32° to 122° F )
	Storage Temperature:	-15° to 65°C (5° to 149° F )
	Humidity	5% to 95%, non condensing
	Altitude	0 to 10,000 feet
Warranty	Lifetime

		to hub, switch, or router						Install an optional backbone
								uplink adaptor at the back of
								the hub and use 10BASE-2,
								10BASE-5, or fiber cable to
								connect the workgroup to a
								network backbone.
10BASE-FL
1	2	3	4	5	6	7	8

Cascade two repeater hubs by connecting fiber cable from a connector

		DECLARATION OF CONFORMITY
Name of Mfg:	Transition Networks
	6475 City West Parkway, Minneapolis MN 55344 USA

at the front of the first hub to a connector at the front of the second hub.

to hub, switch or router

Model:E-FL-HB-0x00 Series Unmanaged Fiber Hub

Part Number: E-FL-HB-0800, E-FL-HB-0800(SC), E-FL-HB-0400,

E-FL-HB-0400(SC)

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the E-FL-HB-0800or E-FL-HB-0400to which this declaration refers is in conformity with the following standards.

10BASE-FL								10BASE-FL
1	2	3	4	5	6	7	8	1	2	3	4	5	6	7	8

EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992; EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

	_November 10, 1999_____
Stephen Anderson, Vice-President of Engineering	Date