Milan Technology MIL-S8001TG manual

Priority ID Map: To configure the QoS control high/low weight setting, enter “m” or “M” at the command prompt. Next, enter the selection number, for port priority setting. There are four-priority levels – High, Middle, Low, and Lowest priority level.

High Priority: Enter "h" or "H" to enable the highest port priority setting.

Middle Priority: Enter "m" or "M" to enable the highest port priority setting.

Low Priority: Enter "l" or "L" t to enable the highest port priority setting.

Lowest Priority: Enter "s" or "S" to enable the highest port priority setting.

27