Milan Technology MIL-S8001TG manual Segment Bridge

Page 17

Segment Bridge

For enterprise networks where large data broadcasts are constantly processed, this switch is an ideal solution for department users to connect to the corporate backbone.

In the illustration below, two Ethernet switches with PCs, print server, and local server attached, are both connect to the switch. All the devices in this network can communicate with each other through the Switch. Connecting servers to the Switch allow other users to access the data on server.

In the below illustration, two 8 Gigabit Copper with one MINI GBIC Smart switch are used to interconnect two small workgroups. By using fiber ports to connect switches, the distance between two switches via fiber cable can be up to 2Km or 30Km (SC single-mode fiber connector).

13

Image 17
Contents MIL-S8001TG Page Table of Contents Page Introduction Features Package Contents Software FeaturesEthernet Switching Technology Management Methods Front Panel Hardware DescriptionPage LED LED IndicatorsDescription of LED Indicators Attaching Rubber Feet Desktop InstallationRear Panel Power On Small Workgroup Network ApplicationSegment Bridge Console Management Connecting a Terminal or PC to the Console PortSettings of communication parameters Main Menu Vlan Mode 1 .1Q Vlan Configuration Enabling 802.1Q Vlan Vlan Configuration Create Vlan Group Page Vlan Status Port-Based Vlan Configuration Port-Based Vlan Group Configuration QoS Control Page Page Broadcast Storm Suppression Reset System Restore to DefaultNon-standard cables Faulty or loose cablesIncorrect connections Cabling Diagnosing LED IndicatorsImproper Network Topologies Technical Specifications Mini Gbic 3.3V Mini Gbic slot shared with port #1 Rev a