Milan Technology MIL-S8001TG manual Introduction

Page 5

1. Introduction

The MIL-S8001TG switch is a multi-port switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking. The switch is targeted at workgroup, department or backbone computing environments.

Figure 1-1. The MIL-S8001TG switch

The 8-Port 10/100/1000 + 1 MiniGBIC Gigabit Ethernet Smart Workgroup Switch features a “store-and-forward“ switching scheme. This allows the switch to auto-learn and store source addresses in a 4K-entry MAC address table.

The MIL-S8001TG switch has 8 auto-sensing 10/100/1000 Base-TX RJ-45 ports plus one MINI GBIC slot which enables long-distance connection.

1

Image 5
Contents MIL-S8001TG Page Table of Contents Page Introduction Features Package Contents Software FeaturesEthernet Switching Technology Management Methods Front Panel Hardware DescriptionPage LED LED IndicatorsDescription of LED Indicators Attaching Rubber Feet Desktop InstallationRear Panel Power On Small Workgroup Network ApplicationSegment Bridge Console Management Connecting a Terminal or PC to the Console PortSettings of communication parameters Main Menu Vlan Mode 1 .1Q Vlan Configuration Enabling 802.1Q Vlan Vlan Configuration Create Vlan Group Page Vlan Status Port-Based Vlan Configuration Port-Based Vlan Group Configuration QoS Control Page Page Broadcast Storm Suppression Reset System Restore to DefaultNon-standard cables Faulty or loose cablesIncorrect connections Cabling Diagnosing LED IndicatorsImproper Network Topologies Technical Specifications Mini Gbic 3.3V Mini Gbic slot shared with port #1 Rev a