Milan Technology CCSF30XX-100 CCSCF30xx-10x Is Data Transfer Failing?, Declaration of Conformity

Page 6

CCSCF30xx-10x

6.Is Data Transfer Failing?

YES

Verify the local copper connection by starting a local copper loop- back (set the loop-back switch on the local media converter to “CL”) and then use a bit error test unit at the local location to run a bit error test.

ErrorBit

UnitTest

Copper

Local

Fiber

Remote

Copper

Remote

Device

 

 

 

 

 

 

Converter

Converter

 

 

 

 

 

 

 

 

 

Verify the local fiber connection by starting a local fiber loop-back at the remote location (set the loop-back switch on the remote media converter to “FL”) and then use a bit error test unit at the local location to run a bit error test.

ErrorBit

UnitTest

Copper

Local

Fiber

Remote

Copper

Local

Device

 

 

 

 

 

 

Converter

Converter

 

 

 

 

 

 

 

 

 

Verify the remote copper connection by starting a local copper loop- back at the remote location (set the loop-back switch on the remote media converter to “CL”) and then use a bit error test unit at the remote location to run a bit error test.

Local

Device

 

Local

 

Remote

BitError

TestUnit

 

 

Copper

Converter

Fiber

Converter

Copper

 

 

 

 

 

 

 

Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.

NO

Proceed to step 7.

7.Is the SDC (Signal Detect / Coax) LED illuminated yellow?

YES

A failure of the remote unit connected to the coax interface has caused an Alarm Indication Signal (AIS) on the coax interface. Correct the remote unit failure.

AIS on the coax link

Coax

Fiber

Coax

Original Fault

Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.

NO

Proceed to step 8.

8.Is the SDF (Signal Detect / Fiber) LED illuminated yellow?

YES

A broken coax link has caused an Alarm Indication Signal (AIS) on the fiber interface. Correct the coax link failure.

Original

 

AIS on the fiber link

Fault

 

 

Coax

Fiber

Coax

Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.

NO

Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.

 

 

 

Declaration of Conformity

 

 

 

 

 

 

 

 

 

 

Name of Mfg:

Transition Networks

 

 

6475 City West Parkway, Minneapolis MN 55344 USA

Model:

CCSCF30xx-10x Series Media Converter

Part Number:

CCSCF3011-100, CCSCF3013-100, CCSCF3014-100,

 

 

CCSCF3015-100, CCSCF3016-100, CCSCF3017-100,

 

 

CCSCF3018-100, CCSCF3019-100, CCSCF3029-100,

 

 

CCSCF3029-101, CCSCF3029-102, CCSCF3029-103,

 

 

CCSCF3039-100

Regulation:

EMC Directive 89/336/EEC

Purpose: To declare that the CCSCF30xx-10xto which this declaration refers is in conformity with the following standards.

CISPR 22:1993; EN 55022:1998 Class A; EN 55024:1998; FCC Part 15 Subpart B; 61000-3-2:1995+A14:2000; 61000-3-3:1995; CFR 21 subpart J

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

 

September 19, 2005

Stephen Anderson, Vice-President of Engineering

Date

10

24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

11

Image 6
Contents Slide-in-Module Media Converter Set the Hardware/Software Jumper J3 InstallationSet the Configuration Switches Set the Coax Grounding Jumpers J11 & J12 OptionalInstall the Coax Cable Set the Loop-Back SwitchInstall the Slide-In-Module Install the Fiber CableOperation Cable SpecificationsPower the Media Converter Coax CableTechnical Specifications TroubleshootingCCSCF30xx-10x Is Data Transfer Failing? Is the SDC Signal Detect / Coax LED illuminated yellow?Is the SDF Signal Detect / Fiber LED illuminated yellow? Declaration of ConformityCompliance Information 33215.D