N-Tron 400 manual Safety Warnings, Electrical Safety

Page 4

Safety Warnings

ELECTRICAL SAFETY

WARNING: Do not disconnect while circuit is live, unless area is known to be non-hazardous.

WARNING: Disconnect the power cable before removing the enclosure top.

WARNING: Do not operate the unit with the top cover removed.

WARNING: Do not work on equipment or cables during periods of lightning activity.

WARNING: Do not perform any services on the unit unless qualified to do so.

WARNING: Do not block the air vents.

WARNING: Observe proper DC Voltage polarity when installing power input cables. Reversing voltage polarity can cause permanent damage to the unit and void the warranty.

Power must be supplied by an isolating source, and a 0.5 A max rated UL recognized fuse must be installed immediately before the unit

LASER SAFETY (405FXE Only)

WARNING: CLASS 1 Laser Product. Do not stare into the Laser Beam.

Rev 102507

4

Image 4
Contents Installation Guide Where YY = -15, -40, or 405TX 405FX-SC 405FX-ST 405FXE-SC-YY 405FXE-ST-YYRev Safety Warnings Electrical Safety405FX, 405FXE, & 405TX Industrial Ethernet Switches Key FeaturesInstallation Package ContentsUnpacking 405FX/405FXE Half Duplex Setup DIN-Rail Mounting Optional MountingFront Panel From Left to RightLNK ACTLED Applying Power Side ViewColor Description Tron Switch Grounding Techniques RJ45 Connector Crimp Specifications Troubleshooting Connecting the UnitSupport FCC Statement KEY Specifications Fiber Transceiver CharacteristicsRegulatory Approvals GOST-R CertifiedTron Limited Warranty