N-Tron 400 manual Package Contents, Installation, Unpacking

Page 6

PACKAGE CONTENTS

Please make sure the Ethernet Switch package contains the following items:

1.405FX/405FXE/405TX Ethernet Switch

2.This Installation Guide

Contact your carrier if any items are damaged.

INSTALLATION

Read the following warning before beginning the installation:

WARNING

The 405FXE unit contains a Class 1 Laser. Do not stare into the laser beam (fiber optic connector) when installing or operating the product.

Never install or work on electrical equipment or cabling during periods of lightning activity. Disconnect the power cable before removing the enclosure top.

Do not operate the unit with the top cover removed

UNPACKING

Remove all the equipment from the packaging, and store the packaging in a safe place. File any damage claims with the carrier.

Rev 102507

6

Image 6
Contents Installation Guide Where YY = -15, -40, or 405TX 405FX-SC 405FX-ST 405FXE-SC-YY 405FXE-ST-YYRev Safety Warnings Electrical Safety405FX, 405FXE, & 405TX Industrial Ethernet Switches Key FeaturesPackage Contents InstallationUnpacking 405FX/405FXE Half Duplex Setup DIN-Rail Mounting Optional MountingLNK Front PanelFrom Left to Right ACTApplying Power Side View LEDColor Description Tron Switch Grounding Techniques RJ45 Connector Crimp Specifications Connecting the Unit TroubleshootingSupport FCC Statement KEY Specifications Fiber Transceiver CharacteristicsRegulatory Approvals GOST-R CertifiedTron Limited Warranty