N-Tron 400 manual KEY Specifications, Fiber Transceiver Characteristics

KEY SPECIFICATIONS
Physical
Height:	2.13" (5.41 cm)
Width:	5.00" (12.70 cm)
Depth:	3.00" (7.62 cm)
Weight:	~ 1.2 lbs. (0.6 kg)
(Note: can be mounted horizontally or vertically)
Electrical
Input Voltage:	10-30 VDC (Regulated)
Input Current:	220mA max. @ 24VDC (Steady State)
Inrush Current:	14.0Amp/0.9ms max. @ 24VDC
Input Ripple:	Less than 100 mV
Input Wire Size:	16-28 AWG
Environmental
Operating Temperature:		-20°C to 70°C
Storage Temperature:		-40°C to 85°C
Operating Humidity:		10% to 90% (Non Condensing)
Operating Altitude:		0 to 10,000 ft.
Network Media
10BaseT:	> Cat-3 Cable
100BaseT:	> Cat-5 Cable
100BaseFX:	Multimode: 50-62.5/125µm Fiber
	Singlemode: 7-10/125µm Fiber

Fiber Transceiver Characteristics

Fiber Length:	2km*
TX Power Min/Max	-19dBm/-14dBm
RX Sensitivity Max:	-32dBm

Wavelength:1310nm *=Multimode ** =Singlemode

15km**	40km**
-15dBm/-7dBm	-5dBm/0dBm
-34dBm	-34dBm
1310nm	1310nm

80km**

-5dBm/0dBm

-34dBm 1550nm

Connectors
10/100BaseT:	5	(five) RJ45 UTP Ports		(405TX)
	4	(four) RJ45 UTP Ports		(405FX/FXE)
100BaseFX:	SC or ST Duplex Port (405FX/FXE)
Recommended Minimum Wiring Clearance:
Front:	2" (5.08 cm)		(405TX)
	5” (12.7 cm)		(405FX/FXE)
Side:	1" (2.54 cm)

Rev 102507 14