VIZIO VSB210WS User Manual
Installing the Battery in the Remote Control
Turn the remote control over. Press inward to release the lock (1), and at the same time, slide the battery holder out of the remote with your fingernail (2).
Insert the supplied CR2025 Lithium Button Battery into the remote control. Make sure that you match the
(+)symbol on the battery with the (+) symbol on the battery holder.
Precautionary Tips for Inserting the Batteries:
Only use the specified battery.
Inserting the battery incorrectly may also result in damage to the remote control.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
Remote Control Range
Point the remote control at the remote control sensor to transmit the commands. Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30°to the left and right, 20°up and down.
VIZIO Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the HD Sound Bar System responds erratically to the remote control or does not respond at all, check the battery. If the battery is low or exhausted, replace it with a fresh battery.
When not using the remote control for a long period of time, remove the batteries. Do not take the battery apart, heat it, or throw it into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Cleaning the Housing and Remote Control
If the housing or remote control is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe with a dry cloth after cleaning.
10
www.VIZIO.com