M-Audio Omnistudio USB quick start English, Plug-and-play convenience of your computer’s USB

Page 2

1. English

ThankOmniStudioyou for choosingUSB Quickthe StartOmniStudioGuide USB from M-Audio. We’ve designed the OmniStudio USB to be a complete, versatile multi-channel recording and playback solution for your PC- or Mac-based Digital Audio Workstation (DAW). The OmniStudio USB gives you up to four inputsusinga four outputs of 16- or 24-bit audio at sampling rates upportto 96kHz,

the plug-and-play convenience of your computer’s USB ..

This Quick Start Guide is designed to give you a basic overview of quicklyinstal ing and setting up the OmniStudio USB, to get you up and running

. Even if you are an experienced computer user and recordist, we suggest you take the time to read the accompanying Users’ Manual. It will help you get the most out of your OmniStudio USB.

To Install the OmniStudio USB

Do NOT connect the OmniStudio USB to your computer until you haveNOTE:run the installer program.

Begin by inserting the M-Audio driver CD-ROM into your computer and browsing to the OmniStudio USB folder. Inside this folder you will find the installer file for your particular operating system. Running the installer application will copy the necessary system files to your computer’s hard drive. Once you’ve completed the installation, you will be prompted to restart your compuputerr’s. After you have restarted, connect the OmniStudio USB to

complete USB port. Your computer will recognize the new device

and the driver installation. Then your OmniStudio USB is ready to use.

For mtore detailed information on installing the OmniStudio USB, please refer the Users’ Manual.

4

Image 2
Contents Quick Start Guide Plug-and-play convenience of your computer’s USB To Install the OmniStudio USBEnglish Connecting the OmniStudio USB