American Standard installation instructions 2774E SERIES WHIRLPOOL/BATHING POOL, Cadet Elite

CADET ELITE™ 6' x 42"

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2774E SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

					PROVIDE ACCESS TO PUMP FOR
					SERVICING ON ALL INSTALLATIONS
					1829 mm
			305 mm	(72)
				RECOMMENDED FITTING LOCATION
229mm		(12)
					64 X 330mm (2-1/2 x 13")
(9)
	19 mm				FOR PIER OR ISLAND
	(3/4)				INSTALLATIONS ONLY

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The

SEE FITTING SPECS FOR DIMENSIONS

FINISHED

WALL

229mm

(9)

whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

1067mm						ON/OFF
					PUMP	SWITCH
(42)		CUTOUT IN FLOOR
533mm		FOR DRAIN
(21)
C/L OF	57mm				(2) AIR VALVES	OUTLINE OF CUTOUT
SUPPLIES	(2-1/4)		(8) JETS	ALT. FITTING		1791mm x 1029mm
						(70-1/2 X 40-1/2)
	C/L OF DRAIN		LOCATION #1
					C/L OF
					SHOWER ARM
OPTIONAL TO
FINISHED FLOOR					C/L OF
USUALLY BETWEEN
1651 & 1981mm					VALVES	IN-LINE HEATER
(65 & 78)	C/L OF
						REMOVABLE
					C/L OF
	OVERFLOW		305mm			BLANK
	38mm		(12)		SPOUT
	(1-1/2)
			102mm			■ LEVELING
	89mm
						STRINGER
	(3-1/2)		(4)
						NOT FOR
						SUPPORT
	502mm
	(19-3/4)					464 mm
	ROUGH					(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.
	SUPPORT		THREADS		70 mm
	FEET	1-1/2 O.D.TAILPIECE			(2-3/4)
					117 mm
					(4-5/8)

GENERAL SPECIFICATIONS FOR 2774E WHIRLPOOL

INSTALLED SIZE					72 x 42 x 19-3/4 In.
		(1829mm x 1067 mm x 502mm)
WEIGHT						137 Lbs. (62 Kg.)
WEIGHT w/WATER						821 Lbs. (372 Kg.)
GAL. TO OVERFLOW							82 Gal. (310 L.)
MIn. OPERATING GAL.							66 Gal. (256 L.)
BATHING WELL AT SUMP		50 x 27 In. (1270 mm x 686 mm)
BATHING WELL AT RIM			65 x 33 In. (1651 x 838mm)
WATER DEPTH TO OVERFLOW							13 In. (330 mm)
FLOOR LOADING		42 Lbs./Sq. Ft. (203 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.								27.8
CUBE (FT3)								55.5
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP				2.1 HP, 14.4 AMPS, 120V.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Flex-Jet Pulse Jet Kit*

•Flex-Jet Soft Jet Kit*

•E-Z-Install Heater*

•Tile Bead Kit*

•Apron Kit*

List of Required Components (not included):

•	Drain*	• Bath Filler*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2002

752863-100 REV. CAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.