M-Audio Omnistudio USB quick start Connecting the OmniStudio USB

Page 3

Connecting the OmniStudio USB

Connect the OmniStudio USB’s Monitor outputs to your amplifier or powered monitors. If you are monitoring through headphones, connect one or two sets of headphones to the OmniStudio USB’s headphone outputs. Connect your microphones, instruments or other line level analog sources to the OmniStudio USB’s front panel Mic/Inst inputs 1 and 2, and line level sources to the rear panel Line Inputs 3 and 4.

Connect your MIDI synths or sound modules to the OmniStudio USB’s Stereo Aux Inputs 1 through 4. Connect your external processors to the FX send and FX returns and/or the Channel 1 and 2 Inserts.

Connect your external MIDI device(s) to the OmniStudio USB’s MIDI In and MIDI Out connectors.

For more information pleaseon the OmniStudio USB’s hardware connections

and how to use them, refer to the Users’ Manual.

OMNISTUDIO USB

5

Image 3
Contents Quick Start Guide To Install the OmniStudio USB EnglishPlug-and-play convenience of your computer’s USB Connecting the OmniStudio USB