MaxTech V.34/V.42bis Section One Introduction, Section Two Installation, Unpacking Your Modem

Page 3

Section One - Introduction

This 28.8 Kbps Plug and Play FAX/Voice/Data Speakerphone Modem connects your computer to all popular high speed modems available today. Your new modem features advanced speakerphone functions for hands-free voice communication and is compatible with Plug and Play (PnP) systems for simplified installation and configuration. This manual describes the hardware installation procedures for your new modem product. Additional information on AT commands and S-registers is provided so that your system can be customized for a particular operating environment.

Section Two - Installation

This section will provide step by step instructions on how to install your new 28.8 Kbps FAX/Voice/Data modem. Installation of this modem product is a three- step process consists of 1) actual hardware installation,

2)plug and play configuration, and 3) communication software installation and configuration.

2.1 Unpacking Your Modem

Be certain that you have all the items listed below. This package contains:

• A modem

• A telephone cable

• User's manual

• Software for the modem

•Software user's manual

2.2What You Need You will need:

1.A phillips-head screw driver

2.A) A Plug and Play enabled Operating System (e.g., Windows 95),

or

B) A Plug and Play Revision 1.0a compliant PC.

Proceed to Section 2.3 now if you have every- thing required.

If you have neither 2A or 2B above, you have two options to provide Plug and Play functionality to your PC.

1. Install Windows 95

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MAN080 Rev SF-1128HV/R16-PnP Contents Unpacking Your Modem Section Two InstallationInstall Windows Section One IntroductionHardware Installation Expansion SlotsBack Plate Hardware Configuration Plug and Play Configuring in WindowsReplace the computer cover and plug in your com- puter Configuring in a Non-Plug and Play System Configuring in a Plug and Play System without WindowsSoftware Installation and Configuration Testing Your Modem After Installation Using Your ModemWhere To Go From Here Basic AT Commands Section Three AT Command SetExecuting Commands Command StructureEnable Autoscan mode Commands are not echoedCommands are echoed Low speaker volumeExtended AT Commands CTS operates per flow control Force DSR Signal High onPower on or reset Disable auto-retrainMNP/V.42/V.42bis Commands Fax Class 2 Commands Fax Class 1 CommandsSection Four S Registers Voice CommandsS Registers Register Function Range/units DefaultSection Six Troubleshooting Modem does not respond to commandsSection Five Result Codes High pitch tone is heard whenever you answer the phone Modem does not dialModem dials but does not connect Modem makes a connection but no data appears on your screenSection Seven Support and Service Appendix a SpecificationsModem exhibits poor voice record or playback Appendix B Speaker Type Selection Appendix C NoticesFCC Compliance DOC Compliance Information FCC Class B StatementUL Notice
Top Page Image Contents