2.2.6.3 Internal and External Bus Connections
If you have both internal and external SCSI device connections to your host adapter, you must terminate the last internal and last external devices on the SCSI bus. You must also disable the termination on all other devices. Termination on the host adapter is automatically disabled in this case.
Figure 2.14 shows an example of how termination is determined for this SCSI bus configuration.
Figure 2.14 Internal and External SCSI Device Termination
Last device on Bus -
Terminators Enabled
Does not end Bus -
Terminators Disabled
Host Adapter Termination
Automatically Disabled
Do not end Bus -
Terminators Disabled
Last Device on Bus -
Terminators Enabled
Detailed Installation Procedure |