Lucent Technologies 20DS manual BLF Lamps, Power Supply Unit

Page 4

Page 4 - Introduction

The BLF Lamps

The DSS keys incorporate dual-colour BLF lamps. These show the status of the number stored under the DSS key.

Red BLF Lamp Signals:

Slow Red Flash:

A call on a line set under the key has been parked. To unpark the call press the DSS key.

Fast Red Flash:

Shows that the extension set under the key is ringing. To pickup the call press the DSS key.

Solid Red:

The extension, line or group set under the key is busy or not available (e.g. set to no calls with no divert number set). Groups only show busy if all members are busy.

Green BLF Lamp Signals:

Slow Green Flash:

Shows a call parked by your phone. To unpark the call, press the DSS key.

Fast Green Flash:

Shows an external call ringing on a line. To answer the call, press the DSS key.

Solid Green:

Shows a call connected to your phone (or held by it).

Alternating Green/Red Lamp Signals:

– Indicates a call to a Pilot number set under the DSS key.

The Power Supply Unit

The 20DS requires the use of a power supply unit (PSU) plugged into a mains power socket. You must only use the PSU's supplied by Lucent Technologies.

United Kingdom: 38YPW00001SBC.

Rest of Europe: 38YPW00001EBC.

Australia: 38YDW0002AUAA.

WARNING:

You must ensure that the PSU's ventilation slots are not obstructed and that there is clear space all around the PSU. Do not fit the PSU adjacent to other PSU's as excessive heat may be generated.

INDeX 20DS User's Guide

38DHB0002UKCN – Issue 3 March 2000

Image 4
Contents Page Contents Introduction Introduction to the 20DSDSS Keys Direct Station Select BLF Lamps Busy Lamp FieldPower Supply Unit BLF LampsUsing the 20DS Setting up the DSS KeysMaking Calls Answering a Call Fast Green FlashHolding Calls Solid Green Speed DialsUnparking Calls Slow Red/Green Flash Transferring Calls Picking up Calls Fast Green/Red FlashTo make an unannounced transfer To make an announced transferAssociating the 20DS Setting Up the 20DSTo associate a 20DS Clearing Settings Programming the DSS KeysReassociating a DSS Unit To program a DSS keyDSS Key Label To remove the label coverTo replace the label cover To use the templateTurn the 20DSs power supply off Testing the Keys & LampsTo test the keys and lamps Calls IndexDSS Keys