Liebert GXT3 user manual Tabs, UPS Tab, Output voltage selection

Chapter 4 Tabs 5

Chapter 4 Tabs

This chapter details the four tabs of the program, including the UPS Tab, Options Tab, Battery Tab and About Tab.

4.1 UPS Tab

When the program starts, the UPS Tab will open, displaying the UPS model along with the current UPS settings , as shown in Figure 4-1. The information can be refreshed at any time using the Refresh button.

Figure 4-1 UPS Tab

Note

In the UPS Tab, the UPS must be in Standby mode for the setting to take effect.

Output voltage selection

The output voltage displayed in the Output textbox is the nominal input/output voltage. This is the nominal output setting not a measured value. The drop down box will show the alternate L-N voltages available. Select the voltage that matches the application, as shown in Figure 4-2.

Figure 4-2 Selecting the output L-N voltage

GXT3 Configuration Program User Manual