Lucent Technologies 7820-0657-001 Hardware Specifications, Table A-1. DSLPipe DSU specifications

Page 29

Hardware Specifications	A
Hardware Specifications

Table A-1 lists the DSLPipe DSU specifications.

Table A-1. DSLPipe DSU specifications

Physical connectors	RJ-11 for SDSL WAN
	DB-25 to V.35 connector

Transmission rate	144 Kbps - 2320 Kbps

DSL line code	2B1Q

Line impedance	135 ohms

Dimensions	220mm x 169mm x 40mm

Weight	Approximately 2 lbs (0.9 kg)

Electrical, power input	1A @ 9 to 18 VDC via AC Adapter

Electrical, power consumption	Less than 5 watts

Operating humidity	5% - 95%, noncondensing

Operating temperature	0-50° C

EMC	FCC-15B

Safety	UL

DSLPipe DSU (SDSL) User’s Guide

A-1

Image 29

Contents DSLPipe DSU Sdsl Lucent Technologies Enabling Lucent to assist you Customer ServiceOther telephone numbers Important safety instructions Important safety instructionsImportant safety instructions Special Requirements Important safety instructions Contents Page Introduction DSLPipe DSU configuration DSLPipe DSU featuresDSLPipe DSU architecture DSLPipe DSU architecturePage Checking package contents InstallationPackage contents Setting up the DSLPipe DSUSetting the data transmission rate Checking the activity of the LED lights Connecting the cablesLocation of the LED lights in the DSLPipe DSU front panel Page Items you need Viewing configuration informationBits per second Specify Data bits Specify Viewing configuration information Viewing configuration informationIndicates Norm Normal or Rev Reverse. The default is Debug Mode window Viewing diagnostic informationFields in the Hdlc Registers list Shows Working if the V.35 line is working. Otherwise, shows Page Table A-1. DSLPipe DSU specifications Hardware SpecificationsPage Warranties and FCC Regulations Product warrantyFCC Part 15 Notice Warranty repairIC CS-03 Notice IC CS-03 Notice