Macsense Connectivity MIH-130 user manual Easy Installation

Page 15

Easy Installation

5.After double-clicking the installed TCP/IP protocol, the TCP/IP properties window appears. To let the computer’s TCP/IP values be automatically assigned by the XRouter Pro’s DHCP server:

a.Click the IP Address tab from the TCP/IP properties window.

b.Select the item Obtain IP address automatically. The XRouter Pro automatically assigns values for the computer’s Gateway, DNS Configuration, and IP Address.

6.After specifying the settings of TCP/IP click OK and then restart Windows to allow the settings to take effect.

10

Image 15

Contents User’s Manual XRouter Pro Copyright Safety Precautions Table of Contents Page About this Manual Chapter ContentIntroduction Sharing Internet AccessPort Switched Ethernet Hub Inside Package Overview Before YOU StartEasy Installation Hardware InstallationConnecting the XRouter Pro to Your Modem To connect computers directly to the XRouter Pro Connecting Computers to the XRouter ProConnecting the Power Supply Setting Up TCP/IP Software ConfigurationEasy Installation Easy Installation Assigning TCP/IP Values Manually Mac OS TCP/IP Configuration Assigning TCP/IP Values Manually Setting Up the XRouter Pro Through a Web Browser Easy Installation Select Specify an IP Address Easy Installation Dhcp Server Settings Advanced ConfigurationAccess Control Virtual Server Device Administration RIP Routing Information Protocol DMZ DeMilitarized Zone HostLAN PPPoE Settings Xxxxx.bin Firmware UpgradeAdvanced configuration Link LED is off TroubleshootingWAN Interface DimensionsPower Standards ComplianceAppendix B Hardware Description Rear Panel Description Dynamic IP address Domain NameInternet PPPoE Point to Point Protocol over Ethernet IP AddressLocal Area Network LAN MAC AddressTCP/IP Static IP address