Lantronix 900-598 manual To Configure Http Settings, Http Authentication Description Settings

		9:Services Settings
HTTP Settings	Description
Logging State	Select Enabled or Disabled for the state of the HTTP server logging.
Max Log Entries	Sets the maximum number of HTTP server log entries. Only the last Max Log
	Entries are cached and viewable.
Log Format	Set the log format string for the HTTP server. Follow these Log Format rules:
	 %a -	remote IP address (could be a proxy)
	 %b -	bytes sent excluding headers
	 %B - bytes sent excluding headers (0 = '-')
	 %h - remote host (same as '%a')
	 %{h}i - header contents from request (h = header string)
	 %m - request method
	 %p - ephemeral local port value used for request
	 %q - query string (prepend with '?' or empty '-')
	 %t - timestamp HH:MM:SS (same as Apache '%(%H:%M:%S)t' or
	'%(%T)t')
	 %u - remote user (could be bogus for 401 status)
	 %U - URL path info
	 %r - first line of request (same as '%m %U%q <version>')
	 %s - return status
Authentication Timeout	The timeout period applies if the selected authentication type is either Digest
	or SSL/Digest. After this period of inactivity, the client must authenticate
	again.

To Configure HTTP Settings

Using Web Manager

To configure HTTP settings, click HTTP in the menu bar and select Configuration.

To view HTTP statistics, click HTTP in the menu bar and select Statistics.

Using the CLI

To enter the HTTP command level: enable -> config -> http

Using XML

Include in your file: <configgroup name=”http server”>

	Table 9-5 HTTP Authentication Settings
HTTP Authentication	Description
Settings
URI	Enter the Uniform Resource Identifier (URI).
	Note: The URI must begin with ‘/’ to refer to the filesystem.

PremierWave XC User Guide 64