6.Repeat step 1, except set the desired fade (FAD) ratio between the front and rear speakers for the current broadcast, and set this level using the VOL 
/ 
buttons. While FAD is displayed, press and hold the P1 button until P_1 appears to the left of the FAD display. The speaker fade ratio is now
This procedure can be repeated for other types of broadcast content using the P2 and P3 buttons in the same manner as described.
br LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD
bs MODE SELECTION
The MODE button provides selection of the Compact Disc source (CD Player or CD Changer). When no CD Changer is connected, and a disc is loaded into the integral CD Player, the disc begins playing. If the MODE switch is pressed, no change will occur. However, when a CD Changer is connected, pressing the MODE switch causes the CD changer to begin playing. Subsequent MODE switch activation from this point results in switching
between the CD Player and the Changer. To return to radio operation, press the BAND switch.
bt DISC SLOT
Gently insert the disc into the front panel slot (label surface facing up) until the 
) indication illuminates and becomes animated, and the track number (01) and CD (Compact Disc) appears on the display panel.
CAUTION: This unit is designed for play of standard 5" (12cm) compact discs ONLY. Do not attempt to use 3" (8cm)
bu TRACK SELECT ( 
/ 
)
During disc play the Track Select functions are performed by the TUN/TRK/SEK button; track select is used to quickly access the beginning of a particular track. Each time the Forward Track Select (
) side of the button is pressed and released, the next higher track number will be selected as shown on the display panel. Similarly, each time the Backward Track Select ( 
) side of the button is pressed, the next lower track number will be selected as shown on the display panel.
cl CUE/REVIEW FUNCTIONS (
/ 
)
During disc play