Remove a 5big enclosure drive tray:
CAUTION: After continuous use, the 5big Storage Server drives may be hot. Use caution when removing a a drive tray with
a disk.
1.Use the included drive lock tool to unlock the drive tray. Turn the lock until it is vertical. (Fig. 04)
2.Place your index finger into the space behind the handle. (Fig. 05)
3.Draw out the drive tray handle and carefully extract it (Fig. 06). Please use caution when removing the drive tray.
See 1.9 Fastening a
Install a disk into the 5big enclosure:
1.Make certain that the replacement or new drive is securely fastened to a drive tray.
2.Carefully insert the drive tray into the empty drive slot. You will feel resistance when the drive tray is most of the way in the bay. Gently push the drive tray handle firmly until you feel it snap into place.
The drive tray handle should be flush with the back of the 5big enclosure.
3.Use the drive lock tool to lock the drive in place.
Fig. 04
Fig. 05
Fig. 06
10