1.7. Views of the 5big Storage Server
1.7.1.Front View – On/Off Button with Status LED (Fig. 01)
1.On/Off power switch - The blue button on the front of the 5big Storage Server turns the unit on or off. The LED remains lit to show that the device is on.
NOTE: Pushing the front LED button while the 5big Storage Server is running will shut the system off. This is true even if the 5big Storage Server is in use. Please keep the unit in a location that will prevent accidentally pushing the front LED button while the 5big Storage Server is active. Select Start > Shut Down from Windows Storage Server 2008 to turn off the 5big Storage Server.
1.7.2.Rear View – (Fig. 02)
2.Ethernet ports (2)
3.USB 2.0 expansion ports (3)
4.eSATA expansion port
5.VGA Monitor
6.Reset button*
Fig. 01
DESIGNED BY NEIL POULTON
1
10
9
8
7. | Power input connection | 2 |
8. | Drive tray lock |
|
9. | Drive tray handle | 3 |
|
|
10. | Drive LED | 4 |
|
LAN 1 | LAN 2 | USB | USB | VGA | POWER |
7
eSATA
6
5
Fig. 02 - Rear view with disk trays
*EMERGENCY RESET ONLY. Use the pointed end of the drive lock tool to push the reset button (Fig.
02 - 6). Please make certain that users are not accessing the system since the 5big Storage Server will reboot upon pressing the button. In the event of an emergency reset, please check the health of the RAID in Windows Disk Management. In most cases, using the reset button will cause the software RAID to rebuild. Generally, the software RAID rebuild is
8