LaCie 5big Storage Server quick start Connecting the Power Cable, Connecting the Ethernet Cable

1.11. Connecting the Power Cable

The power supply kit is composed of two cables: one

cable (A) connects to the LaCie server; and the other cable (B) connects to a power source, such as a wall outlet or a surge protector (Fig. 14).

1.Connect Cable A to the 5big Storage Server.

2.Connect Cable B to the power supply brick (C).

3.Connect Cable B to a surge protector or wall outlet.

CAUTION: (1) Only use the AC adapter sup- plied with your specific LaCie device. Since each product is unique, do not substitute a power supply from another LaCie device or another manufacturer for the LaCie 5big Stor- age Server.

(2)Please note that the AC adapter provided with your LaCie device includes connectors for electrical outlets in multiple regions. Thanks to its 100-240 Volt power supply, you may use your device in a foreign country. However, LaCie accepts no responsibility for any dam- age to the drive resulting from the use of an inappropriate adapter. Further your warranty will be void if you:

•Use a power cable, power supply, or power adapter other than one that has been authorized by LaCie.

•Do not remove your AC adapter when transporting your LaCie device. Neglecting to do so may damage your 5big Storage Server.

DESIGNED BY NEIL POULTON

B

LAN 1 LAN 2 USB USB VGA POWER

eSATA

C

A

Fig. 14

DESIGNED BY NEIL POULTON

LAN 1 LAN 2 USB USB VGA POWER

eSATA

Fig. 15

1.12. Connecting the Ethernet Cable

(Fig. 13 - Network Configuration).

1.Connect an Ethernet cable to one of the Ethernet ports on the back of the LaCie 5big Storage Server (Fig. 15). Please note that both ports may be used for greater performance and reliability. See the Technical Brief on Teaming at www.lacie.com/technologies.

2.Connect the other end of the Ethernet cable(s) into an available Ethernet port (or ports) on your router or switch (Fig. 15).

14