LaCie 131081 OSD warning OUT of Range, To be readjusted, Tions, Hdmi and/or Component, No signal

Page 40

LaCie 324i LCD Monitor

User Manual

Troubleshooting

page 40

Problem

Solution

OSD warning OUT OF RANGE

✦✦ Either the signal clock or the resolution is too high. Choose one of the supported modes.

is displayed when powering

 

 

on the 324i or changing the

 

 

input source. An image may

 

 

be poorly displayed with pixels

 

 

missing.

 

 

Image is unstable or unfocused

✦✦

The signal cable should be completely attached to the computer.

 

✦✦

Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing

 

 

the Fine total. When the display mode is changed, the OSD Image Adjust settings may need

 

 

to be readjusted.

 

✦✦ Make sure your computer’s video output or the video card is compatible with the 324i resolu-

 

 

tions.

 

✦✦

If your text is garbled, change the video mode to non-interlaced and use a 60Hz refresh rate.

HDMI and/or Component

✦✦

Use the OSD Component or HDMI Settings/Aspect Ratio control to adjust the image size.

Video display image is not

✦✦ Make sure your display video card and system are compatible with the mode that you have

sized properly

 

selected. If necessary, consult the video card or system manual to change the graphics settings.

 

 

No signal

✦✦

Make certain the computer is not in sleep or stand-by mode. Touch the keyboard or mouse to

 

 

exit stand-by mode.

 

✦✦ If video does not return to the screen, turn the bottom power switch OFF and ON.

Audio is not present from

✦✦

Verify that your headphone or speaker cable is properly plugged into the 324i audio out port.

speakers or headphones at-

✦✦

For audio from a computer: verify that the computer-to-monitor audio cable is properly plugged

tached to the 324i

 

into your computer audio output as well as the 324i audio input.

 

 

 

✦✦

For Component Audio, verify that the both of the stereo RCA ends are plugged into your source

 

 

and the 324i.

 

✦✦

The volume may be too low. Check the volume level in the operating system, source, and 324i

 

 

audio settings.

 

✦✦

The audio output may be muted in your operating system, source, and/or 324i audio settings.

 

 

 

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Table of Contents LaCie Customer Support Contacts Copyrights TrademarksChanges Canada Compliance StatementHealth and Safety Precautions General Use PrecautionsWhen the power supply cord or plug is damaged Do not cover the vent on the monitorErgonomic Precautions Mode Power Consumption LED colorEnergy Information Energy savingIntroduction Quick LinksClick to jump to a section Thank you for purchasing a LaCie 324i LCD MonitorFeatures LaCie 324i Specifications Box Content LaCieAbout the LCD Stand Blocking Screw Blocking Screw and TransportingViews of the Monitor Front View and Button FunctionsBottom View Getting Connected Connecting the Monitor Display and Video SignalsCable Management For a PC or Mac with DisplayPort outputAudio Signals USB DevicesPower Cable and Power Switch Ergonomic Adjustments Raise and Lower the Monitor ScreenTilt Swivel90˚ Vesa 100 Compliant Alternative Stand Remove the monitor stand for MountingOn the next To prepare the monitor for an alternate standLaCie 324i LCD Monitor Quick Reference On the next Aspect Ratio Effect Video Setting Aspect RatioOff ExpansionLaCie 324i LCD Monitor Enable/Disable PiP Picture-in-Picture PiPMenu Hot KeyChanging the Audio Source from the Default AudioFeature Buttons Description Color SettingSetting Hot Keys and OSD LockEnable DisableOSD Lock MENU+Up ArrowOn-Screen Display OSD OSD Navigation Button FunctionsOSD Picture-in-Picture PiP Sub-menu DescriptionOSD Picture OSD Picture DVI and DisplayPortGamma when changing brightness, contrast, or black levels 4000, 4500, and 5000 Yellow to NeutralTo Very Blue Meet the calibration targetSelect Off to disable Power Management When placing the computer in StandbyDefault is OSD Picture Hdmi and Component VideoACC Viewing extremely dark or extremely bright scenesOSD Others English, French, Italian, German, Russian, or SpanishInput OSD Sound OSD Information Troubleshooting Problem SolutionTo be readjusted No signalExit stand-by mode Speakers or headphones atInformation Where to Find Information Contacting Customer SupportBefore You Contact Technical Support Windows Vista and Windows 7 users Right-click ComputerLaCie Customer Support Contacts Warranty Information Contact us
Top Page Image Contents