LaCie 324i LCD Monitor
User Manual
1.4. About the LCD Stand Blocking Screw
The monitor’s LCD stand is secured during transport by a block- ing screw near the base of the stand. Please follow the procedure below to remove it.
CAUTION: If the blocking screw is removed while the product is on its side or unsecured, the stand may suddenly extend with force. Uncontrolled extension could cause the monitor to strike the handler or to fall, resulting in personal injury or damage to the product.
1.Take the monitor out of the box and remove the cushioning material. Do not remove the blocking screw yet (Fig. 01).
2.Place the monitor on a desk or other horizontal surface.
3.Peel off the seal and remove the blocking screw.
1.4.1.The Blocking Screw and Transporting the 324i
Be sure to keep the blocking screw in an easily accessible loca- tion. You will need to reinsert it into the 324i when transporting the display.
When transporting the monitor:
1. Adjust the 324i to its lowest position.
2. Insert the blocking screw into the stand base to lock it in place. | Fig. 01 |
3.Insert the 324i into the included cushioning material.
4.Carefully place the 324i into its box.
Introduction
page 10