LevelOne WBR-6000 Macintosh Clients, Linux Clients, Other Unix Systems, Fixed IP Address

Page 37

N_One Wireless Broadband Router

Macintosh Clients

From your Macintosh, you can access the Internet via the Wireless Broadband Router. The procedure is as follows.

1.Open the TCP/IP Control Panel.

2.Select Ethernet from the Connect via pop-up menu.

3.Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank.

4.Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

•Set the Router Address field to the Wireless Broadband Router's IP Address.

•Ensure your DNS settings are correct.

Linux Clients

To access the Internet via the Wireless Broadband Router, it is only necessary to set the Wireless Broadband Router as the "Gateway".

Ensure you are logged in as "root" before attempting any changes.

Fixed IP Address

By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration.

•Set your "Default Gateway" to the IP Address of the Wireless Broadband Router.

•Ensure your DNS (Name server) settings are correct.

To act as a DHCP Client (recommended)

The procedure below may vary according to your version of Linux and X -windows shell.

1.Start your X Windows client.

2.Select Control Panel - Network

3.Select the "Interface" entry for your Network card. Normally, this will be called "eth0".

4.Click the Edit button, set the "protocol" to "DHCP", and save this data.

5.To apply your changes

•Use the "Deactivate" and "Activate" buttons, if available.

•OR, restart your system.

Other Unix Systems

To access the Internet via the Wireless Broadband Router:

•Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless Broadband Router.

•Ensure your DNS (Name Server) settings are correct.

36

Page 36 Page 38
Image 37
Page 36 Page 38
Contents LevelOne Table of Contents Appendix a Troubleshooting Internet Access Features Wireless Broadband Router FeaturesIntroduction Advanced Internet FunctionsLAN Features Wireless FeaturesSecurity Features Configuration & ManagementPackage Contents Front-mounted LEDs Physical DetailsRear Panel Rear PanelProcedure InstallationChoose an Installation Site RequirementsConnect LAN Cables Power UpConnect WAN Cable Check the LEDsOverview SetupTo Do this Refer to Using your Web Browser Configuration ProgramPreparation If you cant connect Setup WizardCommon Connection Types Other Modems e.g. Broadband WirelessCable Modems DSL ModemsSingTel RAS Big Pond AustraliaMain Menu Home ScreenNavigation & Data Input NOne Wireless Broadband Router Data LAN Screen LAN ScreenUsing another Dhcp Server Using the Wireless Broadband Routers Dhcp ServerTo Configure your PCs to use Dhcp What Dhcp DoesData Wireless Screen Wireless ScreenIdentification Region Wireless Security Current Setting Options ModeConfigure Station nameMAC Filter Button Draft 802.11n Setting BandwidthSet Stations ProtectedWEP Wireless Security Wireless SecurityData WEP Screen WEP Data EncryptionData WPA-PSK Screen WPA-PSK Wireless SecurityData WPA2-PSK Screen WPA2-PSK Wireless SecurityEncryption Data WPA-PSK+WPA2-PSK Screen WPA-PSK+WPA2-PSK Wireless SecurityPassword Screen Password ScreenTCP/IP Settings Overview PC ConfigurationWindows Clients Using Dhcp Checking TCP/IP Settings Windows 9x/MEUsing Specify an IP Address Gateway Tab Win Network Configuration Win Checking TCP/IP Settings WindowsUsing a fixed IP Address Use the following IP Address Network Configuration Windows XP Checking TCP/IP Settings Windows XPTCP/IP Properties Windows XP Accessing AOL Internet AccessFor Windows 9x/ME/2000 For Windows XPLinux Clients Macintosh ClientsOther Unix Systems Fixed IP AddressWireless Security Wireless Station ConfigurationOperation Operation and StatusStatus Screen Data Status Screen Attached Devices Buttons Connection DetailsRefresh Screen Data PPPoE Screen Connection Status PPPoEData Pptp Screen Connection Status PptpData L2TP Screen Connection Status L2TPLished Data Big Pond Screen Connection Status Telstra Big PondConnection Physical Address Connection Details SingTel RAS Default GatewayData RAS Screen Internet RAS PlanButtons Release/Renew Dhcp ClientData Dynamic IP address Connection Details Dynamic IP AddressRenew Data Fixed IP address Screen Connection Details Fixed IP AddressInternet Advanced FeaturesURL Filter Screen URL FilterData URL Filter Screen Access Control Screen Access ControlOverview Trusted PCs Screen Data Access Control ScreenNOne Wireless Broadband Router Dynamic DNS Domain Name Server Ddns Services work as followsDynamic DNS Screen Data Dynamic DNS ScreenWeb Site PasswordDdns Data Host Name User NameFirewall Rules Screen Firewall RulesData Firewall Rules Address LAN Server IPWAN Users LogInbound Services Action Send to LAN Server WAN Users Incoming Rules Inbound ServicesData Incoming Rules Screen Outbound Services Screen Outgoing Rules Outbound ServicesData Outbound Rules Screen Outbound ServicesData Services Firewall ServicesIP Address seen by Internet Users Virtual ServersVirtual Servers Screen Data Virtual Servers Screen Defining your own Virtual Servers Connecting to the Virtual Servers Data Options Screen OptionsPort Trigger Screen Port TriggerData Schedule Screen ScheduleCurrent Time Use this NTPAdvanced Administration PC Database Screen PC DatabaseKnown PCs Data PC Database ScreenButtons Refresh Data Network Diagnostics Screen DiagnosticsNOne Wireless Broadband Router Data Config File Screen Config FileBackup Config Restore ConfigData Logs Screen LogsData Remote Administration Screen Remote AdministrationTo connect from a remote PC via the Internet NOne Wireless Broadband Router To perform the Firmware Upgrade Upgrade FirmwareGeneral Problems TroubleshootingInternet Access Problem 1 My PC cant locate the Wireless Access Point Wireless AccessProblem 2 Wireless connection speed is very slow NOne Wireless Broadband Router Infrastructure Mode About Wireless LANsModes ChannelsWEP Authentication Wireless LAN ConfigurationKey Pre-shared KeyWireless Security Multi-Function Wireless Broadband Router SpecificationsWireless Interface FCC Statement Regulatory ApprovalsCE Approval NOne Wireless Broadband Router

WBR-6000 specifications

LevelOne WBR-6000 is a versatile wireless broadband router designed to meet the demands of modern networking environments. This device is primarily tailored for both home and small office use, providing a robust solution for users seeking reliable internet connectivity and seamless data transfer.

One of the standout features of the WBR-6000 is its dual-band technology, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability ensures that users can enjoy a less congested network on the 5 GHz band for bandwidth-intensive tasks like gaming and streaming, while still being able to use the 2.4 GHz band for general browsing and lightweight applications. This flexibility greatly enhances performance while minimizing interference from other devices.

The WBR-6000 supports the latest wireless standards, including IEEE 802.11ac, which provides high-speed wireless connectivity. With speeds of up to 1200 Mbps, users can experience smooth and fast data transfers, whether they are downloading large files, watching high-definition videos, or engaging in video conferencing. The router also features multiple Gigabit Ethernet ports, supporting high-speed wired connections for devices that require stable and fast internet access.

Security is a paramount concern for users, and the WBR-6000 addresses this with advanced encryption protocols. It supports WPA3 and WPA2 standards, enabling users to secure their networks against unauthorized access while maintaining a high level of performance. Additionally, the router features a built-in firewall and various security options, ensuring that users’ data remains protected from internet threats.

Another notable characteristic of the LevelOne WBR-6000 is its user-friendly interface, which simplifies the setup and configuration process. Users can easily manage their network settings, customize parental controls, and monitor connected devices through an intuitive web interface or a dedicated mobile app. This ease of use is beneficial for individuals who may not be tech-savvy.

In conclusion, the LevelOne WBR-6000 is an excellent choice for those looking for a powerful and efficient networking solution. Its dual-band capabilities, high-speed wireless performance, strong security features, and user-friendly interface make it ideal for a variety of applications, from casual browsing to intensive online activities. Whether for a home or a small office environment, the WBR-6000 is equipped to handle the demands of today’s internet usage.
Top Page Image Contents