LevelOne WBR-6000 user manual Connection Status Pptp, Data Pptp Screen

Page 43

N_One Wireless Broadband Router

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 24: PPTP Status Screen

Data - PPTP Screen

Connection

Physical Ad-

The hardware address of this device, as seen by remote

dress

devices on the Internet. (This is different to the hardware

 

address seen by devices on the local LAN.)

IP Address

The IP Address of this device, as seen by Internet users. This

 

address is allocated by your ISP (Internet Service Provider).

Connection

• This indicates whether or not the connection is currently

Status

established.

 

• If the connection does not exist, the Connect button can be

 

used to establish a connection.

 

• If the connection currently exists, the Disconnect button

 

can be used to break the connection.

 

• Normally, it is not necessary to use the Connect and

 

Disconnect buttons unless the setting "Connect automati-

 

cally, as required" is disabled.

42

Page 42 Page 44
Image 43
Page 42 Page 44
Contents LevelOne Table of Contents Appendix a Troubleshooting Advanced Internet Functions Wireless Broadband Router FeaturesInternet Access Features IntroductionLAN Features Wireless FeaturesSecurity Features Configuration & ManagementPackage Contents Front-mounted LEDs Physical DetailsRear Panel Rear PanelRequirements InstallationProcedure Choose an Installation SiteCheck the LEDs Power UpConnect LAN Cables Connect WAN CableOverview SetupTo Do this Refer to Using your Web Browser Configuration ProgramPreparation If you cant connect Setup WizardDSL Modems Other Modems e.g. Broadband WirelessCommon Connection Types Cable ModemsSingTel RAS Big Pond AustraliaMain Menu Home ScreenNavigation & Data Input NOne Wireless Broadband Router Data LAN Screen LAN ScreenWhat Dhcp Does Using the Wireless Broadband Routers Dhcp ServerUsing another Dhcp Server To Configure your PCs to use DhcpData Wireless Screen Wireless ScreenIdentification Region Station name Options ModeWireless Security Current Setting ConfigureProtected Button Draft 802.11n Setting BandwidthMAC Filter Set StationsWEP Data Encryption Wireless SecurityWEP Wireless Security Data WEP ScreenData WPA-PSK Screen WPA-PSK Wireless SecurityData WPA2-PSK Screen WPA2-PSK Wireless SecurityEncryption Data WPA-PSK+WPA2-PSK Screen WPA-PSK+WPA2-PSK Wireless SecurityPassword Screen Password ScreenTCP/IP Settings Overview PC ConfigurationWindows Clients Using Dhcp Checking TCP/IP Settings Windows 9x/MEUsing Specify an IP Address Gateway Tab Win Network Configuration Win Checking TCP/IP Settings WindowsUsing a fixed IP Address Use the following IP Address Network Configuration Windows XP Checking TCP/IP Settings Windows XPTCP/IP Properties Windows XP For Windows XP Internet AccessAccessing AOL For Windows 9x/ME/2000Fixed IP Address Macintosh ClientsLinux Clients Other Unix SystemsWireless Security Wireless Station ConfigurationOperation Operation and StatusStatus Screen Data Status Screen Attached Devices Buttons Connection DetailsRefresh Screen Data PPPoE Screen Connection Status PPPoEData Pptp Screen Connection Status PptpData L2TP Screen Connection Status L2TPLished Data Big Pond Screen Connection Status Telstra Big PondConnection Physical Address Internet RAS Plan Default GatewayConnection Details SingTel RAS Data RAS ScreenButtons Release/Renew Dhcp ClientData Dynamic IP address Connection Details Dynamic IP AddressRenew Data Fixed IP address Screen Connection Details Fixed IP AddressInternet Advanced FeaturesURL Filter Screen URL FilterData URL Filter Screen Access Control Screen Access ControlOverview Trusted PCs Screen Data Access Control ScreenNOne Wireless Broadband Router Data Dynamic DNS Screen Ddns Services work as followsDynamic DNS Domain Name Server Dynamic DNS ScreenUser Name PasswordWeb Site Ddns Data Host NameFirewall Rules Screen Firewall RulesData Firewall Rules Log LAN Server IPAddress WAN UsersInbound Services Action Send to LAN Server WAN Users Incoming Rules Inbound ServicesData Incoming Rules Screen Outbound Services Screen Outgoing Rules Outbound ServicesData Outbound Rules Screen Outbound ServicesData Services Firewall ServicesIP Address seen by Internet Users Virtual ServersVirtual Servers Screen Data Virtual Servers Screen Defining your own Virtual Servers Connecting to the Virtual Servers Data Options Screen OptionsPort Trigger Screen Port TriggerData Schedule Screen ScheduleCurrent Time Use this NTPAdvanced Administration PC Database Screen PC DatabaseKnown PCs Data PC Database ScreenButtons Refresh Data Network Diagnostics Screen DiagnosticsNOne Wireless Broadband Router Restore Config Config FileData Config File Screen Backup ConfigData Logs Screen LogsData Remote Administration Screen Remote AdministrationTo connect from a remote PC via the Internet NOne Wireless Broadband Router To perform the Firmware Upgrade Upgrade FirmwareGeneral Problems TroubleshootingInternet Access Problem 1 My PC cant locate the Wireless Access Point Wireless AccessProblem 2 Wireless connection speed is very slow NOne Wireless Broadband Router Channels About Wireless LANsInfrastructure Mode ModesPre-shared Key Wireless LAN ConfigurationWEP Authentication KeyWireless Security Multi-Function Wireless Broadband Router SpecificationsWireless Interface FCC Statement Regulatory ApprovalsCE Approval NOne Wireless Broadband Router

WBR-6000 specifications

LevelOne WBR-6000 is a versatile wireless broadband router designed to meet the demands of modern networking environments. This device is primarily tailored for both home and small office use, providing a robust solution for users seeking reliable internet connectivity and seamless data transfer.

One of the standout features of the WBR-6000 is its dual-band technology, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability ensures that users can enjoy a less congested network on the 5 GHz band for bandwidth-intensive tasks like gaming and streaming, while still being able to use the 2.4 GHz band for general browsing and lightweight applications. This flexibility greatly enhances performance while minimizing interference from other devices.

The WBR-6000 supports the latest wireless standards, including IEEE 802.11ac, which provides high-speed wireless connectivity. With speeds of up to 1200 Mbps, users can experience smooth and fast data transfers, whether they are downloading large files, watching high-definition videos, or engaging in video conferencing. The router also features multiple Gigabit Ethernet ports, supporting high-speed wired connections for devices that require stable and fast internet access.

Security is a paramount concern for users, and the WBR-6000 addresses this with advanced encryption protocols. It supports WPA3 and WPA2 standards, enabling users to secure their networks against unauthorized access while maintaining a high level of performance. Additionally, the router features a built-in firewall and various security options, ensuring that users’ data remains protected from internet threats.

Another notable characteristic of the LevelOne WBR-6000 is its user-friendly interface, which simplifies the setup and configuration process. Users can easily manage their network settings, customize parental controls, and monitor connected devices through an intuitive web interface or a dedicated mobile app. This ease of use is beneficial for individuals who may not be tech-savvy.

In conclusion, the LevelOne WBR-6000 is an excellent choice for those looking for a powerful and efficient networking solution. Its dual-band capabilities, high-speed wireless performance, strong security features, and user-friendly interface make it ideal for a variety of applications, from casual browsing to intensive online activities. Whether for a home or a small office environment, the WBR-6000 is equipped to handle the demands of today’s internet usage.
Top Page Image Contents