LevelOne WBR-6000 user manual Defining your own Virtual Servers

Page 68

N_One Wireless Broadband Router

Internal Ports

 

Enter the range of internal port numbers.

 

 

 

 

Buttons

 

 

 

Defaults

 

This will delete any Servers you have defined, and set the

 

 

pre-defined Servers to use their default port numbers.

Disable All

 

This will cause the "Enable" setting of all Virtual Servers to be

 

 

set OFF.

Update Selected

 

Update the current Virtual Server entry, using the data shown

Server

 

in the "Properties" area on screen.

Add as new Serv-

Add a new entry to the Virtual Server list, using the data

er

 

shown in the "Properties" area on screen. The entry selected

 

 

in the list is ignored, and has no effect.

Delete

 

Delete the current Virtual Server entry. Note that the pre-

 

 

defined Servers can not be deleted. Only Servers you have

 

 

defined yourself can be deleted.

Clear Form

 

Clear all data from the "Properties" area, ready for input of a

 

 

new Virtual Server entry.

 

 

 

 

For each entry, the PC must be running the appropri-

 

 

ate Server software.

 

 

 

 

 

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define and manage your own Servers:

Create a new Server:

1.

Click "Clear Form"

 

2.

Enter the required data, as described above.

 

3.

Click "Add".

 

4.

The new Server will now appear in the list.

Modify (Edit) a Server:

1.

Select the desired Server from the list

 

2.

Make any desired changes (for example, change the

 

 

Enable/Disable setting).

 

3.

Click "Update Selected Server" to save changes to

 

 

the selected Server.

Delete a Server:

1.

Select the entry from the list.

 

2.

Click "Delete".

 

Note: You can only delete Servers you have defined.

 

Pre-defined Server cannot be deleted.

From the Internet, ALL Virtual Servers have the IP

Address allocated by your ISP.

67

Page 67 Page 69
Image 68
Page 67 Page 69
Contents LevelOne Table of Contents Appendix a Troubleshooting Wireless Broadband Router Features Internet Access FeaturesIntroduction Advanced Internet FunctionsWireless Features LAN FeaturesConfiguration & Management Security FeaturesPackage Contents Physical Details Front-mounted LEDsRear Panel Rear PanelInstallation ProcedureChoose an Installation Site RequirementsPower Up Connect LAN CablesConnect WAN Cable Check the LEDsTo Do this Refer to SetupOverview Preparation Configuration ProgramUsing your Web Browser Setup Wizard If you cant connectOther Modems e.g. Broadband Wireless Common Connection TypesCable Modems DSL ModemsBig Pond Australia SingTel RASNavigation & Data Input Home ScreenMain Menu NOne Wireless Broadband Router LAN Screen Data LAN ScreenUsing the Wireless Broadband Routers Dhcp Server Using another Dhcp ServerTo Configure your PCs to use Dhcp What Dhcp DoesIdentification Region Wireless ScreenData Wireless Screen Options Mode Wireless Security Current SettingConfigure Station nameButton Draft 802.11n Setting Bandwidth MAC FilterSet Stations ProtectedWireless Security WEP Wireless SecurityData WEP Screen WEP Data EncryptionWPA-PSK Wireless Security Data WPA-PSK ScreenEncryption WPA2-PSK Wireless SecurityData WPA2-PSK Screen WPA-PSK+WPA2-PSK Wireless Security Data WPA-PSK+WPA2-PSK ScreenPassword Screen Password ScreenWindows Clients PC ConfigurationTCP/IP Settings Overview Using Specify an IP Address Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Gateway Tab Win Checking TCP/IP Settings Windows Network Configuration WinUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings Windows XP Network Configuration Windows XPTCP/IP Properties Windows XP Internet Access Accessing AOLFor Windows 9x/ME/2000 For Windows XPMacintosh Clients Linux ClientsOther Unix Systems Fixed IP AddressWireless Station Configuration Wireless SecurityStatus Screen Operation and StatusOperation Data Status Screen Refresh Screen Buttons Connection DetailsAttached Devices Connection Status PPPoE Data PPPoE ScreenConnection Status Pptp Data Pptp ScreenConnection Status L2TP Data L2TP ScreenLished Connection Physical Address Connection Status Telstra Big PondData Big Pond Screen Default Gateway Connection Details SingTel RASData RAS Screen Internet RAS PlanDhcp Client Buttons Release/RenewConnection Details Dynamic IP Address Data Dynamic IP addressRenew Connection Details Fixed IP Address Data Fixed IP address ScreenAdvanced Features InternetURL Filter URL Filter ScreenData URL Filter Screen Overview Access ControlAccess Control Screen Data Access Control Screen Trusted PCs ScreenNOne Wireless Broadband Router Ddns Services work as follows Dynamic DNS Domain Name ServerDynamic DNS Screen Data Dynamic DNS ScreenPassword Web SiteDdns Data Host Name User NameData Firewall Rules Firewall RulesFirewall Rules Screen LAN Server IP AddressWAN Users LogData Incoming Rules Screen Incoming Rules Inbound ServicesInbound Services Action Send to LAN Server WAN Users Outgoing Rules Outbound Services Outbound Services ScreenOutbound Services Data Outbound Rules ScreenFirewall Services Data ServicesVirtual Servers Screen Virtual ServersIP Address seen by Internet Users Data Virtual Servers Screen Defining your own Virtual Servers Connecting to the Virtual Servers Options Data Options ScreenPort Trigger Port Trigger ScreenSchedule Data Schedule ScreenUse this NTP Current TimeAdvanced Administration PC Database PC Database ScreenButtons Refresh Data PC Database ScreenKnown PCs Diagnostics Data Network Diagnostics ScreenNOne Wireless Broadband Router Config File Data Config File ScreenBackup Config Restore ConfigLogs Data Logs ScreenTo connect from a remote PC via the Internet Remote AdministrationData Remote Administration Screen NOne Wireless Broadband Router Upgrade Firmware To perform the Firmware UpgradeInternet Access TroubleshootingGeneral Problems Problem 2 Wireless connection speed is very slow Wireless AccessProblem 1 My PC cant locate the Wireless Access Point NOne Wireless Broadband Router About Wireless LANs Infrastructure ModeModes ChannelsWireless LAN Configuration WEP AuthenticationKey Pre-shared KeyWireless Security Wireless Interface SpecificationsMulti-Function Wireless Broadband Router CE Approval Regulatory ApprovalsFCC Statement NOne Wireless Broadband Router

WBR-6000 specifications

LevelOne WBR-6000 is a versatile wireless broadband router designed to meet the demands of modern networking environments. This device is primarily tailored for both home and small office use, providing a robust solution for users seeking reliable internet connectivity and seamless data transfer.

One of the standout features of the WBR-6000 is its dual-band technology, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability ensures that users can enjoy a less congested network on the 5 GHz band for bandwidth-intensive tasks like gaming and streaming, while still being able to use the 2.4 GHz band for general browsing and lightweight applications. This flexibility greatly enhances performance while minimizing interference from other devices.

The WBR-6000 supports the latest wireless standards, including IEEE 802.11ac, which provides high-speed wireless connectivity. With speeds of up to 1200 Mbps, users can experience smooth and fast data transfers, whether they are downloading large files, watching high-definition videos, or engaging in video conferencing. The router also features multiple Gigabit Ethernet ports, supporting high-speed wired connections for devices that require stable and fast internet access.

Security is a paramount concern for users, and the WBR-6000 addresses this with advanced encryption protocols. It supports WPA3 and WPA2 standards, enabling users to secure their networks against unauthorized access while maintaining a high level of performance. Additionally, the router features a built-in firewall and various security options, ensuring that users’ data remains protected from internet threats.

Another notable characteristic of the LevelOne WBR-6000 is its user-friendly interface, which simplifies the setup and configuration process. Users can easily manage their network settings, customize parental controls, and monitor connected devices through an intuitive web interface or a dedicated mobile app. This ease of use is beneficial for individuals who may not be tech-savvy.

In conclusion, the LevelOne WBR-6000 is an excellent choice for those looking for a powerful and efficient networking solution. Its dual-band capabilities, high-speed wireless performance, strong security features, and user-friendly interface make it ideal for a variety of applications, from casual browsing to intensive online activities. Whether for a home or a small office environment, the WBR-6000 is equipped to handle the demands of today’s internet usage.
Top Page Image Contents