LevelOne WPC-0100 manual Set up the Network Protocols, Network Service for Microsoft Networking

If any of these items are missing, please follow the instructions below to install them properly:

Set up the Network Protocols:

∙Click “ Add “ and select “ Protocol “ on Network “ Configuration “.

∙Click “ Add “ and then choose the network protocol. Select Microsoft as the manufacturer and “ NetBEUI “, “ TCP/IP “, and “ IPX/SPX-compatible “ for the network protocols. Then click “ OK; “

∙Now your network protocol should be set. Please check if your network needs any special requirements to operate in your office environment.

Network Service for Microsoft Networking:

∙ Click “ Add “ and select “ Service “.

26