Additional Note for Windows NT4.0
1.If you are not the first time to install WLAN IEEE 802.11b Utility and driver under Windows NT4.0, the following message will be prompted during installation:
“NDIS3.0 Packet Driver has existed in the system. “ Click “ Yes “ to update the new driver.
2.If your WLAN Utility and driver can’t work properly, make sure the setting of I/O address and IRQ are correct. From Start/System Manager Tool/Windows NT Diagnosis/Resource to find the unused I/O address and IRQ, and then choose one of them from the combo box.
Additional Note for Windows 2000
1. IEEE802.11b WLAN Utility error message
∙If the IEEE802.11b WLAN Utility and Driver installation has completed under Windows 2000, but an error message appeared as follows, you should check if your adapter inserted successfully and packet protocol installed successfully. (See Section 2.2 “ Install the IEEE802.11b WLAN Utility/Driver “
2. Uninstall failed
∙If you cannot uninstall IEEE802.11b WLAN Utility and Driver successfully. Please follow the procedure below to reinstall the Utility and Driver.
(1)Find the file AWLAN.isu and delete it from the Programs files\ IEEE802.11bWLAN Utility folder.
(2)Reboot your system
(3)Reinstall IEEE802.11b WLAN Utility and Driver.
28