LevelOne FSW-1620TX manual Installation, To locate the switch on a desktop, Rackmount placement

Page 6

3 INSTALLATION

The LevelOne 11" Fast Ethernet Switch is "Plug-&-Play". It does not require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power.

If user need advanced smart functions to manage LAN network more effectively, we provide software and cable for easy configuration of the Switch. Please see section 5 and 6 for further details.

3.1To locate the switch on a desktop

￿Attach the Four (4) rubber feet included in the product package to the bottom of the Switch, one in each corner.

￿Place the Switch on a clean, flat desk or tabletop close to a power outlet. ￿Plug in all network connections and the power cord.

3.2Rackmount placement

￿Attach One (1) rackmounting bracket on each side of the Switch front panel and secure each bracket with the provided screws.

￿Use the other provided screws to secure each Switch to the rack.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LevelOne Table of Contents Unpacking Information Models Key Features For FSW-1620TXProduct Introduction For FSW-2420TXLINK/ACT Rear PanelInstallation To locate the switch on a desktopRackmount placement Half- and Full-Duplex Prior to InstallationHelpful Suggestions Fast EthernetMAC Address Table Broadcast Storm Control only for FSW-1620TX100BASE-TX Product Specifications Page FCC Warning
Top Page Image Contents