Motor Replacement
Disassembly
1.
Relieve pressure; page 6.
2.Remove pump; Displacement Pump Replace- ment, page 26.
CAUTION
Do not drop gear cluster (7) when removing drive housing (10). Gear cluster may stay engaged in motor front end bell or drive housing.
3.Remove drive housing; Drive Housing Replace- ment, page 24.
4.Remove fluid manifold; Pressure Control Re- placement, page 23.
5.Remove control board; Control Board Replace- ment, page 20 or 22.
6.Remove strain relief (37; Fig. 10, 13 or 14) and motor fan (2).
21
35
36
18
39
22
63
1Liberally apply grease
Fig. 17
7.Remove three screws (22) behind board and remove control housing (21).
8.Remove four screws (22) and motor (1) from frame (63).
Assembly
1.Install new motor (1) on frame (63) with four screws (22).
2.Install control housing (21) with three screws (22).
3.Install strain relief (37; Fig. 10, 13 or 14) and motor fan (2).
4.Install fluid manifold; Pressure Control Replace- ment, page 23.
5.Install control board; Control Board Replace- ment, page 20 or 22.
6.Install drive housing (10); Drive Housing Re- placement, page 24.
7.Install pump (13); Displacement Pump Replace- ment, page 26.
1
1
1
22
ti0054b
