Drive Housing Replacement
CAUTION
Do not drop gear cluster (7) when removing drive housing (10). Gear cluster may stay engaged in motor front end bell or drive housing.
Disassembly
1.
Relieve pressure; page 6.
2.Remove pump (13); Displacement Pump Re- placement, page 26.
3.Fig. 16. Remove two screws (18a).Tip sprayer up. Remove two screws (18b) and remove shroud (74).
4.Remove two front screws (22).
74
18a
1
22
18b
ti5915a
5.Remove two back screws (22).
6.Pull drive housing (10) off of motor (1).
Assembly
1.Push drive housing (10) onto motor (1)
2.Install two front screws (22).
3.Install two back screws (22).
4.Fig. 16. Install shroud (74) with two screw
(18a).Tip sprayer up. Install two screws (18b).
5.Install pump (13); Displacement Pump Replace- ment, page 26.
6.Install new access cover (10a) with two screws (10b).
7
10
10a18b
10b
22
Fig. 16
24309063
