Lava Computer lava paylink-ip/dial, 800 manual Single Port PayLink-IP/Dial

Page 4

3.Open a web browser to the IP address of the PayLink-IP and configure the device as described in the "Configuration" section of this manual.

4.After configuring the LAVA PayLink-IPDial, attach it to your network and connect a payment terminal to its serial port.

Serial port activity is indicated by two status LEDs per port. The yellow LED lights when the serial port is transmitting data. The green LED lights when the serial port is receiving data.

POTS Tx

indicator

POTS Rx	RJ-11 POTS
indicator	connector

Single Port PayLink-IP/Dial

Image 4

Contents Lava PayLink-IP/Dial Quick Installation Guide Getting Started Hardware Setup Single Port PayLink-IP/Dial Configuration Configuring network settingsConfiguration Menu Opening screenNetwork Settings Device name Assigned local TCP port Host configuration Host ConfigurationSdlc Configuration Asynchronous Configuration Protocol configuration Protocol Configuration Async Protocol Configuration Sdlc Password selection Password Selection Upgrading SoftwareLava