Lava Computer HQ-ST Link system manual ST Configuration Console Network configuration screen

Page 19

Figure 9: ST Configuration Console: Network configuration screen

7.At a minimum, you will need to set up the network connectivity, the home IP/port, and the identification key.

•LAVA recommends using DHCP at the store, to simplify connectivity. If you are configuring the network manually, you wil need to supply the ST Plus with an IP address (IP Address) , a subnet mask (Subnet Mask), and an address for the network’s gateway (Default Gateway).

•The “Home IP/Port” settings are the IP address and port for the HQ unit that will be used to poll this ST Plus.

•The Identification Key is a user-configurable security value that ensures that only HQ Plus devices and ST Plus devices with matching identification keys will communicate with each other.

8.Optionally, you can supply the device telephone number (Device Tel No), which is the number that the polling software will use when “dialing” to the ST Plus.

9.Screens are available to configure the ST Plus serial port to the requirements of the ECR and polling software that will be used, and to input store-specific information.

Rev. A00

HQ-ST System Manual

Page 17 of 32

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Lava HQ-ST Link System Manual Table of Contents System Design IntroductionTheory of Operation of the Lava HQ-ST Link ST Plus Primary Hardware Components of the HQ-ST SystemST Plus rear connections HQ Plus HQ Remote Console Secondary Hardware Components of the HQ-ST SystemHQ Remote Poller Lava Ether Link Manager Utility ST Plus Configuration ConsoleSoftware Components of the HQ-ST Link System HQ Basic SoftwareEquipment Needed Lava HQ Plus InstallGeneral Page Page Poll Away Page Page Installation of ST Plus Devices at the ECR Equipment Sites Lava ST Plus InstallPage Page Poll Away Hardware Connection ST Configuration Console OperationSoftware Connection ST Configuration Console Network configuration screen Rev. A00 HQ-ST System Manual HQ Basic connections table HQ Basic OperationHQ Basic network connections, serial port settings Worksheet Appendix a Installation ChecklistAdditional Considerations To Verify Appendix B Verify Access to the Internet from the LANTo Verify To Verify Page Rev. A00 HQ-ST System Manual Problem Solution Appendix G TroubleshootingHQ Basic does not show active HQ Plus to ST Plus connections Appendix H Master Reset to Factory Defaults Appendix I Installing the HQ Plus on the PC as a Tapi Modem HyperTerminal Ipconfig FunctionWeb Page Interface on HQ Plus and ST Plus Ping Function

HQ-ST Link specifications

Lava Computer's HQ-ST Link is a robust tool designed for software developers and engineers dedicated to programming and debugging embedded systems. This versatile device combines advanced features with user-friendly technology, making it an indispensable asset for anyone working in the field of embedded software development.

One of the standout features of the HQ-ST Link is its compatibility with multiple microcontroller families, including STM32 and STM8 series. This broad compatibility ensures that developers can utilize the tool across various projects without the need for multiple programming solutions. The tool supports a wide range of communication protocols, making it versatile for various applications.

The HQ-ST Link is equipped with USB 2.0 connectivity, allowing for fast data transfer rates and seamless integration with various development environments. This facilitated connectivity is vital for loading firmware quickly during debugging sessions, ensuring efficiency when developing complex applications.

Additionally, the device supports SWD (Serial Wire Debug) and JTAG (Joint Test Action Group) interfaces, providing flexibility for software developers working with different debugging tools and strategies. The support for these interfaces enables users to conduct in-depth debugging and analysis, leading to efficient debugging processes.

Another noteworthy characteristic of the HQ-ST Link is its built-in programming and debugging capabilities. With advanced features such as flash programming, boundary scan, and real-time data inspection, developers can identify and rectify issues rapidly, streamlining the development lifecycle. This robustness is significant for minimizing downtime, which can be costly for projects with tight deadlines.

For enhanced performance, the HQ-ST Link integrates seamlessly with various Integrated Development Environments (IDEs), including popular platforms like Keil, IAR, and STM32CubeIDE. This compatibility allows developers to leverage the advanced features of modern IDEs, enhancing productivity and workflow.

Moreover, user-friendly documentation and community support further augment the HQ-ST Link's appeal. Developers can readily access resources and support, which facilitates a smoother learning curve and troubleshooting process. The emphasis on community engagement helps foster innovation as users share tips and techniques.

In summary, the Lava Computer HQ-ST Link combines advanced technology with user-friendly features, making it a powerful tool for embedded systems developers. Its compatibility with multiple microcontroller families, support for various debugging interfaces, fast USB connectivity, and seamless integration with leading IDEs position it as a premier choice in the market for programming and debugging solutions.
Top Page Image Contents