Lava Computer MOKO L75.2, LavaPort-Quad installation manual Lava Modem Speed Set for Windows

Page 19

Lava Modem Speed Set for Windows

The LavaPort-Quad supports data rates up to 460.8 kbps, including

115.2kbps and 230.4 kbps. However, not all modems support Com Port rates above 115.2 kbps.

If your modem does not support higher data rates and you select a higher data rate in the LavaPort Properties,Windows will automatically default to the slowest supported rate in the chain.

Some modems do support higher data rates but require special settings (AT Commands) and INF files for configuration. Lava has included a software utility called“Lava Modem Speed Set”which automates these functions and allows for easy speed reconfiguration. This utility may be found in the Utils subdirectory of your LavaPort diskette, and is constantly being updated to support more modems. Please check the Lava Web site for details: www.lavalink.com.

To install the Lava Modem Speed Set utility on your hard drive, insert the LavaPort diskette into your floppy drive, click Start, Run and type A:\Utils\Setup.

19

Image 19
Contents LavaPort-Quad Installation Manual Page Contents Windows95/98 Quick InstallHardware Installation Windows Driver Installation Windows InstallationModifying I/O Address and IRQ Resources is not recommended Page Page Modifying I/O Address and IRQ Resources is not recommended Changing the Com numbering of your Ports Page Setting LavaPort Data Rates in Windows Page Setting LavaPort Fifo Control in Windows Page Setting LavaPort Flow Control in Windows Page Lava Modem Speed Set for Windows Page Windows NT Driver Installation Windows NT 4.0 InstallationPage Setting a 230.4 kbps Data Rate Lava Technical Support