Lava Computer MOKO L75.2, LavaPort-Quad Setting LavaPort Flow Control in Windows

Page 17

Setting LavaPort Flow Control in Windows

Flow Control refers to the type of signaling that is used between the modem and the LavaPort.

If you are connecting the LavaPort to a modem or ISDN terminal adapter, use the default setting of Hardware (RTS/CTS) flow control.

Software Flow Control (Xon/Xoff) is used only for connecting the LavaPort to a non-modem serial device (e.g. Using a null-modem cable to connect to another Com Port).

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents LavaPort-Quad Installation Manual Page Contents Windows95/98 Quick InstallHardware Installation Windows Driver Installation Windows InstallationModifying I/O Address and IRQ Resources is not recommended Page Page Modifying I/O Address and IRQ Resources is not recommended Changing the Com numbering of your Ports Page Setting LavaPort Data Rates in Windows Page Setting LavaPort Fifo Control in Windows Page Setting LavaPort Flow Control in Windows Page Lava Modem Speed Set for Windows Page Windows NT Driver Installation Windows NT 4.0 InstallationPage Setting a 230.4 kbps Data Rate Lava Technical Support
Top Page Image Contents