Denon ADV-M51, D-M51DVS, ADVM51 Play Back, After changing the system settings, Before Operating

4	Press the ENTER button to enter the
	settings.
	ENTER

•The next screen in the system setting

changing menu appears.

Remote control unit

Input function settings

•LINE-1 and LINE-2 can be set as described below.

LINE-1 : “MD”, “CD-R”, “MD/CD-R” or “AUX” can be selected.

(“MD/CD-R” can only be set when a system MD recorder, cassette deck and CD recorder are all connected and system operations are being used.)

LINE-2 : This can be set to “TAPE”, “MD”, “AUX” or “D.AUX”. (Set “D.AUX” to use the D.AUX digital input in combination with the LINE-2 analog input.)

•The setting for LINE-1 has priority. Once a function is set for LINE-1, it is not possible to set the same function for LINE-2. (For example, if “MD” is selected for LINE-1, “MD” is no longer offered as one of the choices for LINE-2.)

LINE-1/LINE-2 analog recording output setting

•Normally set this to “On”.

•With the DVD or D.AUX exclusive digital input function, set this to “Off” if noise is generated when playing sources with high bit rates in the Dolby Virtual Speaker mode.

•This setting is only valid in the Dolby Virtual Speaker mode for the DVD or D.AUX exclusive digital input function. (In surround modes other than the Dolby Virtual Speaker mode and with other input functions, analog recording signals are output, regardless of this setting.)

•Analog recording is not possible when this is set to “Off”. To record, use a mode other than the Dolby Virtual Speaker mode (stereo, for example).

(4) After changing the system settings

•This completes the procedure for changing the system settings. Once the speaker settings, delay times and channel levels have been set, there is no need to change the settings again unless the connected AV components or speakers are changed or the speakers are moved to different positions.

•DVD auto power off and function settings as necessary.

1	At the system setting changing menu
	screen, press the SETUP button.	SETUP
	• The new settings are entered and the
	on-screen display turns off.

Remote control unit

The setup procedure can be quit at any point by pressing this button.

NOTE:

•When system settings have been changed with the system setting changing menu and a speaker system is selected with the quick system settings, the speaker settings and delay time settings are changed to the values preset for the quick system settings.

ENGLISH

11PLAY BACK

(1)Before Operating

DVD SURROUND RECEIVER ADV-M51	SURROUND / SELECT
	PUSH - PARAM.

	- +
MENU / SET	BAND
TONE / SDB	VOLUME
FUNCTION
ON / STANDBY
PHONES

2

OFF		ON		2
	VCR
SLEEP	REC	TITLE	TIME
	NTSC/PAL
SOURCE		TV IN	T V
CLEAR	ENTER	CHARAC.	EDIT/MENU
	A-B REPEAT	SLIDE MODE	ZOOM
		TV CH -	TV CH +
PROG/DIRECT	REPEAT	RANDOM	CD SRS
			SEARCH MODE
MODE	MEMO	BAND
			TUNING /
DVD	TUNER	D.AUX	TV VOL
1	2	3	+
MD/LINE-1	TAPE /LINE-2		-
4	5	6
	5CH STEREO	AUTO DECODE	TUNER
7	8	9	+
DIRECT	STEREO	VIRTUAL	CH
CALL	0/10	+10	-
TEST TONE	INPUT MODE	SURROUND	FUNCTION
		TUNER TV / VCR
A / V		DVD	IN/SURR.
	SYSTEM	MD	IN/SURR.
		CDR TAPE
1		2	+
DVD
8	9
		-

67

STATUS

3MUTING

SETUPTONE /SDB

ENTER

CH SELECT			SURROUND
			PARAMETER
		- VCR CH +
RETURN	DISPLAY	MENU	TOP MENU
ANGLE	AUDIO		SUB TITLE
	RC-936

1	Refer to “CONNECTIONS” (pages 10 to 17) and check that all
	connections are correct.
2	Turn on the power.
	Press the POWER	ON / STANDBY Light
	button.	(green)
		ON

Main unit Remote control unit

When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off.

Whenever the ON/STANDBY button is in the STANDBY state, the apparatus is still connected on AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation.

39