Denon ADV-M51 manual ENGLISH 4 “AUDIO SETUP” is selected, •Digital Out, •LPCM 44.1 kHz / 48 kHz

ENGLISH

(4) “AUDIO SETUP” is selected

1

See page 88.

2

3 Use the 0 and 1 cursor buttons to select the “AUDIO SETUP”, then press the ENTER button.

•DIGITAL OUT

Use this to select the digital output’s signal format.

•LPCM (44.1 kHz / 48 kHz)

Use this to set the digital audio output when playing DVDs recorded in linear PCM audio.

To exit the audio setup mode

Use the • and ª cursor buttons to select “> NEXT DVD MENU”, then press the ENTER button.

•The screen returns to as it was in step 2.

Remote control unit

d

ENTER

AUDIO SETUP
DIGITAL OUT		NORMAL
LPCM(44.1kHz/48kHz)		OFF
NEXT DVD MENU
SELECT :	DECISION : ENTER BUTTON

Remote control unit

4	Use the • and ª cursor buttons to select the desired
	setting, then press the ENTER button.
	2When “DIGITAL OUT” is selected.
	•	NORMAL (Factory default)
		Make the selection when playing back in surround
		playback a DVD that has been recorded with Dolby Digital
		or DTS on this unit.
		The Dolby Digital or DTS digital signal is also output from
	•	the digital output jacks.
		PCM

DVDs that were recorded in Dolby Digital DTS are converted to linear PCM 48 kHz/16 bit (2 channels). Make the selection when making a digital recording.

To exit the digital out mode

Press the ENTER button, you can go back to the previous screen.

Remote control unit

d

ENTER

Remote control unit

AUDIO SETUP
DIGITAL	OUT	NORMAL
		PCM
SELECT :		DECISION : ENTER BUTTON

95