Denon D-M51DVS, ADVM51, ADV-M51 manual Troubleshooting, English, 2Are all the connections correct ?

ENGLISH

23

TROUBLESHOOTING

Check again before assuming the player is malfunctioning

2Are all the connections correct ?

2Are you following the instructions in the manual ?

2Are the speakers and other components operating properly ?

If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.

Symptom

Cause

Measures

Page

DISPLAY not lit and sound not produced

•

Power cord not plugged in securely.

• Check the insertion of the power cord plug.

10

etc.

when power switch set to on.

broadcasts,

• Speaker cords not securely connected.

•

Connect securely.

10

• Improper

position of

the

audio

function

• Set to a suitable position.

44

button.

DISPLAY lit but sound not produced.

•

Volume control set to minimum.

• Turn volume up to suitable level.

42

FM

•

MUTING is on.

•

Switch off MUTING.

46

•

Digital signals not input Digital input

•

Input digital signals or select input jacks to

47

and

selected.

which digital signals are being input.

tapes

•

Connections between the video output jack

• Check whether the connections are correct.

13

discs,

of this unit and the input connector of the

monitor are incomplete.

the

Monitor doesn’t display an image.

• The input

setting of

the

monitor

TV is

• Set the input switching of the TV to the jack

—

different.

to which the video input is connected.

to

• When

“PROGRESSIVE” is

set,

no

video

•

Set “INTERLACED” if you want to use the

40

listening

signals are output from the VIDEO OUT or

VIDEO OUT or S-VIDEO OUT signals.

S-VIDEO OUT terminals.

when

The program cannot be copied from DVD

• Almost all movie software contains a copy

• A copy cannot be made.

—

problems

to the VCR.

prevention signal.

• Power

is

not being

supplied

to the

• Switch on the power of the subwoofer.

—

subwoofer.

Common

The subwoofer does not produce sound.

•

The subwoofer setting is made to “No” in

•

Change the setting to “Subwoofer” in the

31

the setup.

setup.

•

The output of the subwoofer has not been

• Make the proper connections.

10

connected.

•

Batteries dead.

• Replace with new batteries.

23

unit

• Remote control unit too far from this unit.

•

Move closer.

23

• Obstacle

between this unit and remote

•

Remove obstacle.

23

control

control unit.

This unit does not operate properly when

•

Different button is being pressed.

• Press the proper button.

19

remote control unit is used.

•

<and >ends of battery inserted in reverse.

•

Insert batteries properly.

23

Remote

• The mode selection of the remote control is

•

Press the remote control mode selection

24

not properly selected. The DVD mode, AV

button for the item you wish to operate. To

mode, or audio mode is not properly

operate this unit, use with the DVD mode.

selected.

106