Denon ADV-M51 manual System Functions, 1Auto power on function, 2Auto function selection, English

ENGLISH

20

SYSTEM FUNCTIONS

2Making system connections between the ADV-M51 and the D-M31 series cassette deck (DRR-M31) makes operation even easier. (For instructions on connections, refer to “Connecting to D-M31 Series System Components” on pages 10 to 11.)

2System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set the input/output functions for the components being used. (See page 38.) The setting contents are maintained until they are next changed even when the power is switched off.

(1)Auto power on function

•When the play/pause button on the main unit ( 1/3 ) or the DVD play button on the remote control unit ( 1 ) is pressed while the power is in the standby mode, the ADV-M51’s power turns on automatically, and if a disc is loaded in the ADV-M51 the disc is played.

		1
DVD SURROUND RECEIVER ADV-M51	SURROUND / SELECT
	PUSH - PARAM.
		- +
	MENU / SET	BAND
	TONE / SDB	VOLUME
	FUNCTION
ON / STANDBY
	PHONES

	DIRECT	STEREO	VIRTUAL	CH
	CALL	0/10	+10	-
	TEST TONE	INPUT MODE	SURROUND	FUNCTION
			TUNER TV / VCR
	A / V		DVD	IN/SURR.
		SYSTEM	MD	IN/SURR.
1			CDR	TAPE
	1		2	+
	DVD

89

1	When the ADV-M51 is in the standby mode, the power can be
	turned on simply by pressing the play/pause button on the
	main unit or the DVD play button on the remote control unit.
	If a disc is loaded, playback starts.
		1
		DVD
	Main unit	Remote control unit

The auto power on function also turns the power on when the disc holder is opened while the ADV-M51 is in the standby mode.

Main unit

-

67

STATUS

3MUTING

SETUP TONE /SDB

ENTER

•To listen to a radio program, simply press one of the tuner preset buttons (“+” or “–”) on the remote control unit. The power turns on and a station is tuned in.

•The power on function works in the same way when system connections are made with the D-M31 series cassette deck (DRR- M31). For details, refer to the respective component’s operating instructions.

TUNER

+

CH

-

Remote control unit

(2)Auto function selection

•At the touch of a button, the function switches automatically to “DVD” and disc playback begins.

		1
DVD SURROUND RECEIVER ADV-M51	SURROUND / SELECT
	PUSH - PARAM.
		- +
	MENU / SET	BAND
	TONE / SDB	VOLUME
	FUNCTION
ON / STANDBY
	PHONES

	DIRECT	STEREO	VIRTUAL	CH
	CALL	0/10	+10	-
	TEST TONE	INPUT MODE	SURROUND	FUNCTION
			TUNER TV / VCR
	A / V		DVD	IN/SURR.
		SYSTEM	MD	IN/SURR.
1			CDR	TAPE
	1		2	+
	DVD

89

-

67

STATUS

3MUTING

SETUP TONE /SDB

1	Press the play/pause button on the ADV-M51 or the DVD play
	button on the remote control unit while a component than the
	DRR-M31 (cassette deck) is playing.
	• Playback on the
	other component
	stops, the ADV-
	M51’s function		1
	switches to		DVD
	“DVD” and if a
	disc is loaded	Main unit	Remote control unit
	playback of the

disc starts.

• To listen to a radio program, simply press	TUNER
one of the tuner preset buttons (“+” or “–”)	+
on the remote control unit.	CH
	-
• Auto function selection works in the same
way when system connections are made
with the D-M31 series cassette deck (DRR-
M31). For details, refer to the respective	Remote control unit
component’s operating instructions.

•Auto function selection does not work for components connected using the AUX or D.AUX input/output terminals.

101