Denon D-M51DVS, ADVM51, ADV-M51 manual English, DVD Auto Power Off setting, Function settings

ENGLISH

7	Press the ENTER button to enter the		4	Press the ENTER button to enter the
	settings.	ENTER		settings.
	• The next screen in the system setting			• The next screen in the system setting
	changing menu appears.			changing menu appears.

ENTER

Remote control unit Remote control unit

To cancel the settings after the adjustments have been made Display the channel level adjustment screen, then use the •, ª, 0 and 1 cursor buttons to select “Level Clear” and select “Yes”. The level settings for all the speakers are set to 0 dB.

NOTE:

When the channel levels are adjusted at the channel level settings, the adjusted values are applied to all playback modes.

[4] DVD Auto Power Off setting

•The ADV-M51 is equipped with a function for automatically setting the power to the standby mode if no operation is performed for 30 minutes when the function is set to DVD. Here set whether to use this function or not.

•By factory default this is set to “No”.

1	If you are not at the system setting changing menu screen,
	read step 1 and 2 on page 34.
2	At the system setting changing menu screen, use the 0 and
	1 cursor buttons to select “DVD AUTO POWER OFF”, then

press the ENTER button.

ENTER

Remote control unit Remote control unit

•The DVD auto power off setting screen appears.

DVD AUTO POWER OFF

(DVD FUNCTION ONLY)

AUTO POWER OFF YES NO

SELECT : FINISH : ENTER BUTTON

3	Use the 0 and 1 cursor buttons to select the “Auto Power
	Off” mode.

B Yes: The function for automatically turning the power off

when the function is set to DVD is activated. B No: The auto power off function is not activated.

[5] Function settings

•Set the LINE-1 and LINE-2 function names and turn the analog recording output (REC OUT) on or off.

•When used in combination with the D-M31 series, set according to the components being used and make system connections for convenient system functions.

•It is also possible to assign the D.AUX digital input to LINE-2.

1	If you are not at the system setting changing menu screen,
	read step 1 and 2 on page 34.
2	At the system setting changing menu screen, use the 0 and
	1cursor buttons to select “FUNCTION ASSIGNMENT”, then

press the ENTER button.

ENTER

Remote control unit Remote control unit

•The input function setting screen appears.

FUNCTION ASSIGNMENT

LINE-1 MD

LINE-2TAPE

LINE-1/LINE-2 REC OUT

ON OFF

SELECT : FINISH : ENTER BUTTON

3	Use the • and ª cursor buttons to select the item to be set,
	then use the 0 and 1 cursor buttons to make the settings.

BLINE-1 Function name selection (“MD” by default)

AUX CD-R MD MD/CD-R

BLINE-2 Function name selection (“TAPE” by default)

TAPE AUX D.AUX

BLINE-1/LINE-2 REC OUT

:Set whether to turn the recording output during playback in the Dolby Virtual Speaker mode when the function set to DVD or the D.AUX exclusive digital input on or off.

On : The signals are output in stereo. (Factory default)

Off : The signals are not output. (Recording is not possible.)

38