Denon ADV-M51 manual ENGLISH 3Playback using the Dolby Headphone mode, CINEMA MUSIC2 MUSIC1

ENGLISH

(3)Playback using the Dolby Headphone mode

•The ADV-M51 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for achieving 3D sound over regular headphones.

•The Dolby Headphone mode is set when headphones are connected to the ADV-M51’s headphones jack.

•There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).

•The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema, Music 1 and Music 2 modes can be selected with the 2-channel mode setting.

	2,3
DVD SURROUND RECEIVER ADV-M51	SURROUND / SELECT
	PUSH - PARAM.
		- +
	MENU / SET	BAND
	TONE / SDB	VOLUME
	FUNCTION

ON / STANDBY

PHONES

3	Set the various surround parameters.
	If nothing is done for 6 seconds from when the parameter

is displayed, the normal display reappears.

SURROUND / SELECT

PUSH - PARAM.

1

TEST TONE INPUT MODE	SURROUND	FUNCTION
	TUNER TV / VCR
A / V	DVD	IN/SURR.
SYSTEM	MD	IN/SURR.
	CDR	TAPE

1 2 +

DVD

89

-

67

STATUS

3MUTING

SETUPTONE /SDB

		ENTER		3
	CH SELECT		SURROUND	2
			PARAMETER
		- VCR CH +
	RETURN	DISPLAY MENU	TOP MENU
	ANGLE	AUDIO	SUB TITLE
		RC-936
1	jack.Connect headphones	(sold	separately) to the headphones

•When headphones are plugged in, the output to the speakers is automatically turned off and no sound is produced from the speakers.

PHONES

2	Press the surround parameter button and display the surround
	parameters.
	When the function is set to DVD, this is also shown on the
	display.
	SURROUND / SELECT
	PUSH - PARAM.	SURROUND
		PARAMETER

Main unit Remote control unit

•Dolby H mode setting

H D H1

DH1 DH2 DH3 BYPASS

,/

•2-channel mode setting

2 C I N E MA

•The mode switches as shown below each time a button is operated.

CINEMA

MUSIC2 MUSIC1

Can be selected when there is no signal or when playing a 2-channel source.

There are also the same parameters as those described under “(2) Playing in the Dolby Virtual Speaker mode”, namely:

BD.COMP. setting

BLFE level setting

BDEFAULT setting

When the surround parameters are displayed, use the • and ª cursor buttons on the remote control unit to switch to previous or following items.

Main unit Remote control unit

57