Denon D-M51DVS, ADVM51 manual ENGLISH 4 Connecting the antenna terminals, AM loop antenna assembly

ENGLISH

(4) Connecting the antenna terminals

DIRECTION OF

BROADCASTING

STATION

FM INDOOR ANTENNA (Supplied)

FM ANTENNA

75 Ω /ohms

COAXIAL CABLE

FM ANTENNA ADAPTER (Option)

AM LOOP ANTENNA (Supplied)

GROUND

AM OUTDOOR ANTENNA

•An F-type FM antenna cable plug can be connected directly.

•If the FM antenna cable’s plug is not of the F-type, connect using the F-type antenna adapter (Option).

AM loop antenna assembly

12

Remove the vinyl tie and take out the connection line.

4

a. With the antenna on top any stable surface.

Mount

b. With the antenna attached to a wall.

Connect to the AM antenna terminals.

3

Bend in the reverse direction.

Connection of AM antennas

1. Push the lever. 2. Insert the conductor. 3. Return the lever.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTES:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

Installation hole Mount on wall, etc.

14