Denon D-M51DVS, ADVM51 manual 3CAUTIONS ON HANDLING, English, SPEAKER SYSTEM D-M51DVSonly 2SC-A3L

ENGLISH

WARNING:

•When installing the speaker systems on the ceiling or wall, to ensure safety, have specialists do the installation work.

•Be sure to fasten the speaker cords to a wall, etc., to prevent people from tripping over them or otherwise pulling on them accidentally, causing the speaker systems to fall.

•Be sure to check for safety after installing the speaker systems. Afterwards, perform safety inspections at regular intervals to be sure there is no danger that the speaker systems will fall. Denon will accept no responsibility for damages or accidents caused by inappropriate choice of the place of installation or improper installation procedures.

•For your safety, do not put anything nor lean yourself on the loudspeakers.

•Do not push the loudspeaker from aside to protect it from topping that may cause serious accident.

•Fix speaker cables to prevent being caught on it and making loudspeakers topping down.

(2) SPEAKER SYSTEM (D-M51DVS only)

2SC-A3L

•Note that color blotching may occur on a TV, etc., due to interaction with the speaker system if there is a magnet or an object generating magnetic force nearby.

Examples: (a) When there are magnets on the door of the rack, stand, etc.

(b)When a health device, etc., equipped with magnets is placed nearby.

(c)When toys or other objects using magnets are placed nearby.

•Note that the illustrations in this instructions may differ from the actual set for explanation purposes.

•Be sure to keep the operating instructions.

After reading these operating instructions, store them in a safe place. We also recommend filling in the necessary items on the back cover.

3CAUTIONS ON HANDLING

(1)DVD SURROUND RECEIVER

•Switching the input function when input jacks are not connected

A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks.

•Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER terminals

The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals include a muting circuit. Because of this, the output signals are greatly reduced for several seconds after the power switch is turned on or input function, surround mode or any other-set-up is changed. If the volume is turned up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before adjusting the volume.

•Whenever the power switch is in the STANDBY state, the apparatus is still connected on AC line voltage.

Please be sure to unplug the cord when you leave home for, say, a vacation.

2DSW-3L

•The built-in amplifier of the active subwoofer (DSW-3L) includes a muting circuit. The output signal is strongly attenuated for several seconds after the power is turned on. If the volume is adjusted during this time, the output may be extremely high when the muting circuit is deactivated. Be sure to wait for the muting circuit to be deactivated before adjusting the volume.

•Note that color blotching may occur on a TV, etc., due to interaction with the subwoofer if there is a magnet or an object generating magnetic force nearby.

Examples: (a) When there are magnets on the door of the rack, stand, etc.

(b)When a health device, etc., equipped with magnets is placed nearby.

(c)When toys or other objects using magnets are placed nearby.

•Note that the illustrations in this instructions may differ from the actual set for explanation purposes.

•Be sure to keep the operating instructions.

After reading these operating instructions, store them in a safe place. We also recommend filling in the necessary items on the back cover.

WARNING:

•Be sure to fasten the power cord to a wall, etc., to prevent people from tripping over it or otherwise pulling on it accidentally, causing the subwoofer to fall.

6