Denon D-M51DVS, ADVM51, ADV-M51 manual 3,5,7,9,11, 2,3,4,6,8, 13,15,17, 10,12,14,16, 1,18, English

SURROUND / SELECT

PUSH - PARAM.

ENGLISH

(2) Setting the everyday timer and once timer

2Be sure to set the current time before setting the timer. (See page 81.)

2Use the everyday timer to switch the power on and off (standby) once at the same time each day. Use the once timer to switch the power on and off (standby) at the specified time once only.

2With the ADV-M51 it is possible to play the tuner, a DVD or a CD with the timer.

2It is possible to play a DVD, CD, tape, the tuner, MD or the device connected to the AUX terminals with the timer and to record the tuner or the device connected to the AUX terminals onto an MD recorder or cassette deck using the timer.

Timer playback is not possible for some DVDs. (Most DVDs stop at the menu screen.)

Example 1: Listening to preset station “3” (FM 92.5 MHz) from p.m.12:35 to p.m.12:56 with the everyday timer

	3,5,7,9,11,		2,3,4,6,8,
	13,15,17	10,12,14,16
DVD SURROUND RECEIVER ADV-M51	SURROUND / SELECT
	PUSH - PARAM.
			- +
	MENU / SET		BAND
	TONE / SDB		VOLUME

FUNCTION

ON / STANDBY

PHONES

1,18

1	Turn on the power.
	ON / STANDBY

		Main unit
2	Press the MENU/SET button to display “TIMER”.
	T I M E R	MENU / SET
		Main unit
3	Turn the SURROUND/SELECT knob to display “EVERYDAY”,
	then press the MENU/SET button.

•The display switches as follows

each time the SURROUND/SELECT knob is turned:

	E V E R Y D A Y	Main unit
	The display switches as follows	MENU / SET
	each time the
	SURROUND/SELECT knob is
	turned:
		Main unit
4	Press the MENU/SET button.	MENU / SET

E FUNC

5	Turn the SURROUND/SELECT knob and set the function to
	“TUNER”.
			SURROUND / SELECT
			PUSH - PARAM.
		E TUNER
			Main unit

The function switches as shown below each time the surround button is pressed.

Functions marked “*” differ according to whether “LINE- 1” or “LINE-2” is set.

DVD TUNER *(LINE1)

*AUX (LINE1 or 2) *(LINE2)

*TU (LINE2) *TU (LINE1)

:Clockwise turn :Counterclockwise turn

6	Press the MENU/SET button.			MENU / SET
				Main unit
7	Turn the SURROUND/SELECT knob and select preset number
	“P03”.
	P 03		FM 92 . 50M	SURROUND / SELECT
				PUSH - PARAM.
				Main unit
8	Press the MENU/SET button.
	• The data for the selected station is stored in the memory
	and the unit is set to the timer start time setting mode.
	• “E” and “on” are displayed.
				MENU / SET
	E	on	AM12:00
				Main unit
9	<Setting the timer start time>
	Turn the SURROUND/SELECT knob to set the hours place to
	“PM12”.
	E	on	PM12:00	SURROUND / SELECT
				PUSH - PARAM.

Main unit Main unit

82