Denon D-M51DVS, ADVM51, ADV-M51 manual English, Delay time distance setting, Preparation

ENGLISH

[2] Delay time (distance setting)

•Input the distances from the listening position and the various speakers to set the surround delay time.

•Upon shipment from the factory default the delay time is set to the default values in step 3 below.

Preparation:

Measure the distance from the listening position to the various speakers.

		L1: Distance between subwoofer and
FL	FR	listening position
		L2: Distance between front speakers
		and listening position

Subwoofer

Listening position

1	If you are not at the system setting changing menu screen,
	read step 1 and 2 on page 34.
2	At the system setting changing menu screen, use the 0 and
	1 cursor buttons to select “DELAY TIME (Distance)”, then

press the ENTER button.

ENTER

Remote control unit Remote control unit

•The delay time setting screen appears.

DELAY TIME

SET THE DISTANCE TO EACH SPEAKERS
UNIT	METERS	FEET
DEFAULT
FRONT	2 . 7 m
SUBWOOFER	2 . 7 m

	SELECT :		FINISH : ENTER BUTTON
	• The unit for the distance can be switched between “m”
	(meters) and “ft” (feet) using the 0 and 1 cursor buttons.
	If you do not want to change the unit, press the ª cursor
	button to proceed to the next step.
3	At “Default Value”, select “Yes” to set the delay times for the
	different speakers to the default values.
	B Yes:	The values are set to the defaults.
	B No:	The current settings are retained.

4	Use the • and ª cursor buttons to select the speaker, then
	use the 0 and 1 cursor buttons to set the distance between

the speaker and the listening position.

• The distance changes by 0.1 meters (or 1 foot when the unit is set to feet) each time the 0 and 1 cursor button is pressed. Select the value closest to the measured distance.

DELAY TIME

SET THE DISTANCE TO EACH SPEAKERS

UNIT	METERS	FEET
DEFAULT
FRONT	2 . 7 m
SUBWOOFER	2 . 7 m
SELECT :	FINISH : ENTER BUTTON

Make sure the difference in the distances set for the various speakers is no greater than 3.0 meters (10 feet). If an inappropriate distance is set, “CAUTION: OUT OF SETTING RANGE” is displayed. Change the position of the speaker and make the setting over.

5	Press the ENTER button to enter the
	settings.
	ENTER

•The next screen in the system setting

changing menu appears.

Remote control unit

36