Denon D-M51DVS, ADVM51, ADV-M51 4Stopping Playback, Apple, M . V O L U M E - 2, English, Notes

ENGLISH

6	Use the cursor buttons (•, ª, 0 and 1) to select the desired
	item.

• For some discs there is a second menu screen. If so, press the 9button to display the next menu screen. (See the disc’s jacket.)

The cursor buttons (•, ª, 0 and 1) do not work for video

CDs. Use the number buttons to select the desired item.

Either turn the main unit’s main volume control or use the

8 main volume control buttons on the remote control unit to adjust the volume.

	The volume is shown
M . V O L U M E - 2 0	on the display.

VOLUME

+

		Remote control unit
7	Press the ENTER button.
	•	The desired item is selected and playback starts.
	•	You can return to the menu screen by pressing the TOP
		MENU button while the DVD is playing, though this
		depends on the disc.
	•	Press the RETURN button during playback of a video CD to
		return to the menu screen.

ENTER

-

Main unit Remote control unit

For detailed instructions on operations for the surround modes and surround parameters, see “12 Operating the Surround Functions” on pages 44 to 58.

•In the “AUTO” input mode, the signals of the disc being played are identified, Dolby Digital, DTS or PCM decoding is selected automatically and the disc is played.

•In the Dolby Virtual Speaker surround mode, the signals of the disc being played are automatically decoded in Dolby Digital or DTS then played in the Dolby Virtual Speaker surround mode.

Example: When “Apple” is selected

TOP MENU

Apple	Banana
Orange	Strawberry
Peach	Pineapple

Remote control unit

Apple

NOTES:

•If appears on the TV screen while buttons are being operated, that operation is not possible on the ADV-M51 or with

that disc.

•Set the disc in the disc guide.

•Only set one disc in the tray.

•The disc keeps turning while the menu screen is displayed on the TV screen.

(4)Stopping Playback

1During playback, press the STOP button on the main unit or the remote control unit, playback stops and wall paper is displayed.

<Resume play memory function (DVD only)>

•With the ADV-M51, when the STOP button is pressed, that position is stored in the memory. At this time, “1” flashes on the display. When the PLAY button is pressed after pressing the STOP button, playback resumes from the position at which it was stopped.The resume play memory function is canceled if the disc tray is opened or the STOP button is pressed a second time.

About the DVD standby function

When the ADV-M51’s function is set to DVD, the DVD standby mode is set automatically if the disc remains in the stop mode for approximately 10 minutes.

•In the DVD standby mode, the DVD section’s power is off and output of the video signals is also off.

The ADV-M51’s display reads “DVD standby” at this time.

•When in the DVD standby mode, the power of the sections other than the DVD section is on and function switching and other operations can be performed on the main unit and remote control unit. When a DVD control button (the play/pause and button open/close buttons on the main unit, the play button on the remote control unit, etc.) is operated, the DVD section’s power turns on automatically and disc playback and opening/closing of the disc holder can be performed.

BAND

2

Main unit Remote control unit

The resume play memory function only works for discs for which the elapsed time is shown on the display during playback.

Auto power off function.

•The ADV-M51 is equipped with a function that automatically switches the power to standby if no operation is performed for 30 minutes while in the stop mode with the function set to DVD.

•This function is set to off upon shipment from the factory. If you wish to turn it on, set the “DVD AUTO POWER OFF” setting to “YES” as described on page 38.

NOTE:

•The DVD standby function only turns off the power of the DVD section. It is different from the DVD auto power off function set with the system settings in Setup in that the DVD section remains functional.

42