Denon D-M51DVS, ADVM51, ADV-M51 manual ENGLISH 2 Loading Disc, Notes, Figure

ENGLISH

(2) Loading Disc

2Set discs in the disc tray with the labeled (printed) side facing up.

12 cm disc guide

8 cm disc guide

Disc tray

NOTE:

•Do not move the this unit while a disc is playing. Doing so may scratch the disc.

(1)Opening and Closing the Disc Tray

qTurn on the power.

wPress the OPEN/CLOSE button.

OPEN/CLOSE button

Disc tray

NOTES:

•Even when the power is in the standby mode, when the OPEN/CLOSE button is pressed, the ADV-M51’s power turns on and the disc tray operates. (Auto power on function)

•Even if the function is set to something other than DVD, when the OPEN/CLOSE button is pressed, the function switches to DVD and the disc tray operates. (Auto function select function)

•Do not strike on the button with a pencil, etc.

(2)Loading Discs

•Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up.

•With the disc tray fully open, set the disc in the disc tray.

•Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2).

•Press the OPEN/CLOSE button. The disc is automatically loaded.

•The disc tray can also be closed automatically to load the disc by pressing the PLAY button.

Figure 1

Outer disc tray

12 cm disc

Figure 2

Inner disc tray

8 cm disc

NOTES:

•If a foreign object is caught in the disc tray during closing, simply press the OPEN/CLOSE button again and the tray will open.

•Do not press the disc tray in by hand when the power is off. Doing so will damage it.

•Do not place foreign objects in the disc tray. Doing so will damage it.

(3)Selecting the video output

•Factory default: interlace, 525i.

•When a TV compatible with progressive 525p inputs is connected, the setting can be switched using the operation described below.

1	With the function set to “DVD”, press the MENU/SET
	button for at least 2 seconds.
	• The current setting (“INTERLACED” or “PROGRESSIVE”)
	is displayed after “VIDEO OUT”.
	MENU / SET
	Main unit
2	Turn the surround/select control while the setting is
	displayed to switch it.
	• The setting switches alternately between “INTERLACED”
	and “PROGRESSIVE”.
	• The normal display reappears if no operation is performed
	for several seconds.
	SURROUND / SELECT
	PUSH - PARAM.

Main unit

NOTE:

•When “PROGRESSIVE” is set, no video signals are output from the VIDEO OUT or S-VIDEO OUT terminals. Set “INTERLACED” if you want to use the VIDEO OUT or S- VIDEO OUT signals.

40