Installing Mirrored Systems | CentreVu CMS Release 3 Version 8 | |
How to upgrade an Enterprise platform to disk mirroring | 22 | |
|
|
|
Step 8: Set up the mirrors for the swap space
Set up the mirrors for the swap space with the following steps:
1. Activate metadevice d15:
#metainit
d15: Concat/stripe is set up
#
2. Activate metadevice d17:
#metainit d17
d17: Concat/stripe is set up
#
3. Activate metadevice d16:
#metainit d16
d16: Concat/stripe is set up
#
4. Attach d16 to d17:
#metattach d17 d16
d17: submirror d16 is attached
#
5. Verify that swap is set up and resynching:
#metastat d17 d17: Mirror
Submirror 0: d15 State: Okay Submirror 1: d16
State: Resyncing Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 2209680 blocks
.
.
.
Check the State: lines in the output list. They should read either Okay or Resyncing. If they do, then everything is fine. If they indicate any other status, something has gone wrong with the setup: discontinue the upgrade and telephone the Lucent National Customer Care Center (1.800.242.2121) or contact your Lucent representative or distributor.